Hydraulic System Oil Level - Check
Show/hide table
 |
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin. |
 |
Operate the machine until the oil is warm.
Park the machine on a level surface with front wheels straight ahead. Lower all attachments to the ground. Apply a slight downward pressure to the attachments. Center the articulation of the machine and install the frame lock pin. The frame lock pin must move freely in the frame. Move the front wheels to vertical and install the bolt for the wheel lean. Engage the parking brake. Stop the engine.
Show/hide table
 | |
| Illustration 1 | g00689389 |
The hydraulic tank sight gauge is positioned on the left side of the machine.
Show/hide table
 | |
| Illustration 2 | g00110368 |
- Maintain the oil level above the "ADD" mark in hydraulic tank sight gauge (1) .
- If necessary, add oil. Slowly loosen the filler cap in order to relieve the tank pressure. Remove filler cap (2). Add oil through the filler tube.
Show/hide table
 | |
| Illustration 3 | g00110369 |
- Clean the filler cap and install the filler cap.
Caterpillar Information System:
3064 and 3066 Engines for Caterpillar Built Machines Cooling System - Check - Overheating
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Device Test
CB-534C Vibratory Compactor Engine Oil Sample - Obtain
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Piston Pump (Conveyor)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Conveyor Hydraulic System
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Conveyor Planetary Drive (Auger)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Piston Motor (Auger Conveyor)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Auger Conveyor
988G Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Assemble
988G Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Disassemble
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Plate Leveling
14H Motor Grader Hydraulic System Oil Level - Check
2000/03/27 Procedure to Enter the Correct Password for the Calibration Procedure on the Payload Control System (PCS) {7494}
2000/06/05 A New O-ring Seal is Used on the Brake Housing Assembly of Wheel Harvesters {4351}
777D and 777D HAA Off-Highway Truck and 776D Off-Highway Tractor Magnetic Screen (Transmission) - Clean
777D and 777D HAA Off-Highway Truck and 776D Off-Highway Tractor Oil Filter (Parking Brake Release) - Replace
777D and 777D HAA Off-Highway Truck and 776D Off-Highway Tractor Oil Filter (Steering) - Replace
777D and 777D HAA Off-Highway Truck and 776D Off-Highway Tractor Oil Filter (Torque Converter) - Replace
Ultrasonic Testing Procedure for Brake Bands{5405} Ultrasonic Testing Procedure for Brake Bands{5405}
CB-534C Vibratory Compactor Hydraulic System Oil - Change
777D and 777D HAA Off-Highway Truck and 776D Off-Highway Tractor Oil Filter (Transmission) - Replace
777D HAA Off-Highway Truck Screen (Torque Converter Sump) - Clean
2000/03/20 The Torque Value Has Changed For High Temperature Locknut {7553}
140H and 160H Motor Graders Hydraulic System Oil Level - Check