Hydraulic System Oil Level - Check
Show/hide table
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin. |
Operate the machine until the oil is warm.
Park the machine on a level surface with front wheels straight ahead. Lower all attachments to the ground. Apply a slight downward pressure to the attachments. Center the articulation of the machine and install the frame lock pin. The frame lock pin must move freely in the frame. Move the front wheels to vertical and install the bolt for the wheel lean. Engage the parking brake. Stop the engine.
Show/hide table
Illustration 1 | g00689271 |
The hydraulic tank sight gauge is positioned on the left side of the machine.
Show/hide table
Illustration 2 | g00189324 |
- Maintain the oil level above the "ADD" mark in hydraulic tank sight gauge (1).
Show/hide table
Illustration 3 g00189325 - If necessary, add oil. Slowly loosen the filler cap in order to relieve the tank pressure. Remove filler cap (2). Add oil through the filler tube.
- Clean the filler cap and install the filler cap.
Caterpillar Information System:
TH103 Telehandler Refill Capacities
2000/04/03 A New Electronic Solenoid Valve Improves the Release of Auxiliary Hydraulic Pressure {5130, 5264, 5479}
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Relief Valve (Main) - Test
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Relief Valve (Charge) - Test and Adjust
14H Motor Grader Hydraulic System Oil - Change
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Piston Pump Neutral - Test and Adjust
TH103 Telehandler Lubricant Viscosities
CB-534C Vibratory Compactor Hydraulic System Oil Filter - Replace
120H Motor Grader Hydraulic System Oil - Change
3054 Engine Cooling System - Test
CB-534C Vibratory Compactor Hydraulic System Oil Level - Check
140H and 160H Motor Graders Hydraulic System Oil - Change
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Plate Leveling
988G Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Disassemble
988G Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Assemble
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Auger Conveyor
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Piston Motor (Auger Conveyor)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Conveyor Planetary Drive (Auger)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Conveyor Hydraulic System
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Piston Pump (Conveyor)
CB-534C Vibratory Compactor Engine Oil Sample - Obtain
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Device Test
3064 and 3066 Engines for Caterpillar Built Machines Cooling System - Check - Overheating
120H Motor Grader Hydraulic System Oil Level - Check