Axle Oscillation Bearings - Lubricate
Wipe the remote grease fittings before you apply lubricant to the remote grease fittings.
Show/hide table
 | |
| Illustration 1 | g00475849 |
The remote grease fittings for the axle oscillation bearings are located in the center of the machine on the left side.
Show/hide table
 | |
| Illustration 2 | g00389099 |
Apply lubricant to the remote grease fittings for the axle oscillation bearings.
Caterpillar Information System:
IT14G Integrated Toolcarrier Articulation Bearings - Lubricate
IT14G Integrated Toolcarrier Maintenance Parts
IT14G Integrated Toolcarrier Refill Capacities
IT14G Integrated Toolcarrier Towing the Machine
IT14G Integrated Toolcarrier Leaving the Machine
IT14G Integrated Toolcarrier Bulldozing and Dumping
D250E Series II and D300E Series II Articulated Trucks Engine Air Filter Service Indicator - Inspect
D250E Series II and D300E Series II Articulated Trucks Engine Air Filter Secondary Element - Replace
D250E Series II and D300E Series II Articulated Trucks Engine Air Filter Primary Element - Clean/Replace
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Electric Starting Motor - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Main Control Valve (Tilt and Auxiliary)
D250E Series II and D300E Series II Articulated Trucks Differential and Final Drive Oil Sample - Obtain
IT14G Integrated Toolcarrier Differential and Final Drive Oil - Change
IT14G Integrated Toolcarrier Differential and Final Drive Oil Level - Check
IT14G Integrated Toolcarrier Hydrostatic Drive Oil - Change
IT14G Integrated Toolcarrier Hydrostatic Drive Oil Level - Check
IT14G Integrated Toolcarrier Tire Inflation - Check
IT14G Integrated Toolcarrier Walk-Around Inspection
IT14G Integrated Toolcarrier Windows - Clean
IT14G Integrated Toolcarrier Single Lever Control
IT14G Integrated Toolcarrier Caterpillar Reference Material
572R Pipelayer Hydraulic System Load Sense Manifold
Electronic Modular Control Panel II (EMCP II) For MUI Engines Alarm Mode
G3B, K3A and L3A Denso Alternators Component - Test