IT14G Integrated Toolcarrier Caterpillar

Illustration 1	g00476055

FLOAT (1) - Push the single lever control forward into the detent. The bucket will lower to the ground. The bucket will follow the contour of the ground.

The single lever control will remain in the FLOAT position until the single lever control is pulled out of the detent. The single lever control will return to the HOLD position when the single lever control is released.

LOWER (2) - Push the single lever control forward in order to lower the bucket. The single lever control will return to the HOLD position when the single lever control is released.

HOLD (3) - The single lever control will return to the HOLD position when the single lever control is released from the RAISE position or from the LOWER position. The bucket will remain in the selected position.

RAISE (4) - Pull the single lever control backward in order to raise the bucket. Release the single lever control in order to stop lifting the bucket. The single lever control will return to the HOLD position when the single lever control is released.

The single lever control is detented in the fully raised position. The single lever control will stay in the detent and the bucket will continue to rise until the bucket reaches the lift kickout height. Then, the single lever control will return to the HOLD position.

DUMP (5) - Move the single lever control toward the right in order to dump a load from the bucket.

TILT BACK (6) - Move the single lever control toward the left in order to tilt the bucket backward.

The single lever control is detented in the TILT BACK position. The lever will remain in the TILT BACK position until the bucket reaches the angle that is set by the kickout.