Illustration 1 | g00474192 |
Instrument Panel (1) GSC: Generator Set Control. (2) SP: Speed Potentiometer. (3) ECS: Engine Control Switch. (4) SAS: Start Aid Switch (optional). (5) ALM: Alarm Module (optional). (6) SLM: Synchronizing Lights Module (optional). (7) VAR: Voltage Adjust Rheostat. (8) ESPB: Emergency Stop Push Button. (9) PLS: Panel Light Switch (optional). |
Most of the EMCP II components are located on the instrument panel or the subpanel. Other EMCP II components that exist near the engine are the engine oil pressure sensor (EOPS), engine coolant temperature sensor (ECTS), fuel solenoid (FS), magnetic speed pickup (MPU), and engine coolant loss sensor (ECLS) (optional).
Illustration 2 | g00474193 |
Panel Interior Of Instrument Panel and Sub-Panel Instrument Panel (1) GSC: generator set control. (2) SP: speed potentiometer (optional). (3) ECS: engine control switch. (4) SAS: start aid switch (optional). (5) ALM: alarm module (optional). (6) SLM: synchronizing lights module (optional). (7) VAR: voltage adjust rheostat. (8) ESPB: emergency stop push button. (9) PLS: panel light switch (optional). (10) AUX: auxiliary terminal strip. (11) PWM: analog to PWM converter. (12) RPR: reverse power relay (optional). (13) ATB: AC transformer box. (14) GPHI: ground post high voltage. (15) SMMS1: starting motor magnetic switch 1. (16) SMMS2: starting motor magnetic switch 2 (optional). (17) ASR: air shut-off relay (optional). (18) PPPS: prelube pump relay slave (optional). (19) PPMS: prelube pump relay master (optional). (20) EPC : ether pull-in coil (optional). (21) EMC : ether hold-in coil (optional). (22) AUXREL: auxiliary relay (optional). (23) Starting motor circuit breaker. (24) ASR: air shut-off circuit breaker (optional). (25) Prelube pump circuit breaker (optional). (26) RM: relay module (part of GSC). |