Engine Design
Show/hide table
Illustration 1 | g00472128 |
Engine design (A) Inlet valves (B) Gas admission valves (C) Exhaust valves |
Number and arrangement of cylinders ... 50 degree Vee 16
Valves per cylinder
- Inlet valves ... 2
- Exhaust valves ... 2
- Gas admission valve ... 1
Displacement ... 339.3 L (20,700 cu in)
Bore ... 300 mm (11.8 inch)
Stroke ... 300 mm (11.8 inch)
Compression ratio ... 9.2:1
Compression ratio ... 11:1
Combustion ... Spark Ignited
Firing order
- Standard rotation CCW ... 1-2-5-6-3-4-9-10-15-16-11-12-13-14-7-8
Valve lash
- Inlet valve ... 0.50 mm (0.020 inch)
- Exhaust valve ... 1.27 mm (0.050 inch)
- Gas admission valve ... 0.64 mm (0.025 inch)
When the crankshaft is viewed from the flywheel end the crankshaft rotates in the following direction. ... Counterclockwise
Note: The front end of the engine is opposite the flywheel end of the engine. The left and the right side of the engine are determined from the flywheel end. The number 1 cylinder is the right front cylinder.
Caterpillar Information System:
3306C Truck Engine Turbocharger Wastegate - Remove and Install
G3612 and G3616 Engines Engine Design
3406E, C-10, C-12, C-15, C-16 Truck Engines Engine Oil Level Gauge - Calibrate - C-10 and C-12 Engines Only
3406E, C-10, C-12, C-15, C-16 Truck Engines Cylinder Head Grounding Stud - Inspect/Clean/Tighten
3406E, C-10, C-12, C-15, C-16 Truck Engines Engine Oil Level - Check
G3606 and G3608 Engines Air Lines
3306C Truck Engine Turbocharger - Assemble
3306C Truck Engine Turbocharger - Disassemble
G3606 and G3608 Engines Exhaust Bypass Valve
3306C Truck Engine Turbocharger - Install
G3612 and G3616 Engines Pressure Switch
3406E, C-10 and C-12 Truck Engines Belt - Inspect
3406E, C-10 and C-12 Truck Engines Belt Tensioner - Inspect
3306C Truck Engine Exhaust Manifold - Remove and Install
3306C Truck Engine Water Temperature Regulator - Remove and Install
3406E, C-10, C-12, C-15, C-16 Truck Engines Engine Oil and Filter - Change
3306C Truck Engine Water Pump - Remove
3306C Truck Engine Water Pump - Install
3304B and 3306B Engines for Caterpillar Built Machines Water Pump - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Water Pump - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Bearing Clearance - Check
3306B Industrial Engine Piston Cooling Jets - Remove and Install
3176C and 3196 Industrial Engines Belt Tensioner
3306C Truck Engine Crankshaft - Remove