Turbocharger Wastegate - Remove and Install
Removal Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove two clamps (1) and hose (2) .
Show/hide table
Illustration 1 | g00472049 |
Note: The turbocharger does not need to be removed from the engine in order to remove the wastegate.
- Remove retainer (5) and two nuts (3) . Remove housing (4) for the diaphragm.
Show/hide table
Illustration 2 | g00472051 |
- Remove three mounting bolts (6) and bracket (7) .
Show/hide table
Illustration 3 | g00472059 |
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install bracket (7) and three mounting bolts (6) .
Show/hide table
Illustration 4 | g00472059 |
- Install housing (4) for the diaphragm. Install two nuts (3) and retainer (5) .
Show/hide table
Illustration 5 | g00472051 |
- Install hose (2) and two clamps (1) .
Show/hide table
Illustration 6 | g00472049 |
Caterpillar Information System:
G3612 and G3616 Engines Engine Design
3406E, C-10, C-12, C-15, C-16 Truck Engines Engine Oil Level Gauge - Calibrate - C-10 and C-12 Engines Only
3406E, C-10, C-12, C-15, C-16 Truck Engines Cylinder Head Grounding Stud - Inspect/Clean/Tighten
3406E, C-10, C-12, C-15, C-16 Truck Engines Engine Oil Level - Check
G3606 and G3608 Engines Air Lines
3306C Truck Engine Turbocharger - Assemble
3306C Truck Engine Turbocharger - Disassemble
G3606 and G3608 Engines Exhaust Bypass Valve
3306C Truck Engine Turbocharger - Install
G3612 and G3616 Engines Pressure Switch
3406E, C-10 and C-12 Truck Engines Belt - Inspect
G3606 and G3608 Engines Fuel Control
G3612 and G3616 Engines Engine Design
3406E, C-10 and C-12 Truck Engines Belt Tensioner - Inspect
3306C Truck Engine Exhaust Manifold - Remove and Install
3306C Truck Engine Water Temperature Regulator - Remove and Install
3406E, C-10, C-12, C-15, C-16 Truck Engines Engine Oil and Filter - Change
3306C Truck Engine Water Pump - Remove
3306C Truck Engine Water Pump - Install
3304B and 3306B Engines for Caterpillar Built Machines Water Pump - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Water Pump - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Bearing Clearance - Check
3306B Industrial Engine Piston Cooling Jets - Remove and Install
3176C and 3196 Industrial Engines Belt Tensioner