Illustration 1 | g01857075 |
(1) Transmission Control (2) Key Start Switch (3) Temperature Control (4) Battery Disconnect Switch (5) Alternator (6) Starting motor (7) Batteries (8) Data Link (9) Monitoring System |
Transmission Control
Illustration 2 | g00926471 |
The transmission control is located beside the operator's seat.
Key Start Switch
Illustration 3 | g00921001 |
The key start switch is located on the operator's console.
Temperature Control
Illustration 4 | g00920990 |
The temperature control is located on the operator console.
Battery Disconnect Switch
Illustration 5 | g00920827 |
Open the access cover on the right side of the machine. The battery disconnect switch is located in the engine compartment.
Alternator
Illustration 6 | g00921145 |
The alternator is part of the engine assembly.
Starting Motor
Illustration 7 | g00921950 |
The starting motor is located on the rear of the engine.
Batteries
Illustration 8 | g00920816 |
The batteries are located in the rear of the engine compartment on the right side of the machine.
Data Link
Illustration 9 | g00926475 |
The data link connector is located to the right of the driver's seat.
Monitoring System
Illustration 10 | g00926473 |
The machine monitor is located in the cab.
Alert Indicators
The indicators are located on the machine monitor. Refer to the other sections of this manual for details on the monitor. As an automatic lamp test, all of the alert indicators will light when the engine start switch key is turned to the ON position. The lamps should stay on for three to five seconds. The action alarm should also sound. If all of the alert indicators do not come on or if the action alarm does not sound, investigate the cause.
Note: The alert indicators are part of the monitoring system.