Torque Converter
Show/hide table
 | |
| 图 1 | g02689719 |
Show/hide table
| 160-6401 变矩器总成 的技术规格 | |||
|---|---|---|---|
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 16 | 1A-2029 螺栓 | 拧紧至扭矩为 50 ± 7 N·m (37 ± 5 lb ft)。 |
| 2 | 8 | 0L-1351 螺栓 | 拧紧至扭矩为 50 ± 7 N·m (37 ± 5 lb ft)。 |
| 3 | 3 | 8P-9714 垫片 | 根据需要在轴端和盘之间使用垫片。 垫片组总厚度应比螺栓 (4) 拧紧至扭矩为 10 N·m (7 lb ft) 时测得的间隙低 0.050 ± 0.025 mm (0.002 ± 0.001 in)。 |
| 2 | 8P-9715 垫片 | ||
| 4 | 2 | 0T-0924 螺栓 | 拧紧至扭矩为 50 ± 7 N·m (37 ± 5 lb ft)。 |
| 5 | 1 | 9P-4878 摩擦片 | 一个新片的厚度为 4.95 ± 0.08 mm (0.195 ± 0.003 in)。 |
| 6 | 8 | 5P-0076 螺栓 | 拧紧至扭矩为 50 ± 7 N·m (37 ± 5 lb ft)。 |
| 7 | 36 | 0S-1588 螺栓 | 拧紧至扭矩为 50 ± 7 N·m (37 ± 5 lb ft)。 |
| 8 | 9 | 8P-7857 自由轮滚柱 | 务必将新弹簧 (9) 和滚柱 (8) 安装到单向离合器中。 安装弹簧 (9) ，同时使尽量多的簧圈朝向凸轮外径。 |
| 9 | 9 | 8P-7858 自由轮弹簧 | |
Show/hide table
 | |
| 图 2 | g02754436 |
Show/hide table
| 部件之间的间隙 | 径向间隙 | 运转间隙 (1). | |
|---|---|---|---|
| (B) 导轮和涡轮 | 新 | 1.50 ± 0.38 mm (0.059 ± 0.015 in) |
0.75 ± 0.19 mm (0.030 ± 0.008 in)。 |
| 最大磨损 | 3.05 mm (0.120 in) |
1.52 mm (0.060 in)。 |
|
| (C) 导轮和泵轮 | 新 | 1.50 ± 0.38 mm (0.059 ± 0.015 in) |
0.75 ± 0.19 mm (0.030 ± 0.008 in)。 |
| 最大磨损 | 3.05 mm (0.120 in) |
1.52 mm (0.060 in)。 |
|
Show/hide table
| ( 1 ) | 径向间隙的一半 |
Caterpillar Information System:
2002/11/11 New Parking Brake Switches Are Used {1435, 4284}
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines ECM Will Not Communicate with Other Systems or Display Modules
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Power Train Electrical Schematic (Transmission)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Operational Checks (Steering System)
R2900 Load Haul Dump Towing the Machine
3508 and 3516 EUI Engines and 5130 and 5230 Excavators Muffler
14H Motor Grader 3176C Engine Supplement Rear Chassis Support - Remove
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Differential and Bevel Gear
797 Off-Highway Truck Air Dryer - Install
R2900 Load Haul Dump Lifting and Tying Down the Machine - R2900 SUPA 20 Load Haul Dump
R2900 Load Haul Dump Lifting and Tying Down the Machine - R2900 Load Haul Dump
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Swing System
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Switch Circuits
3508 and 3516 EUI Engines and 5130 and 5230 Excavators Muffler
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader Transmission Control (Shift Lever)
2002/09/16 Correction to Specification, System Operation, Testing and Adjusting Module , "Steering System Pressure Test" {4300}
2003/02/10 A New Brake Cooling Screen is Available for Improved Service Life {1374, 1380, 3016, 3154, 5057}
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems Rotor Drive Planetary - Remove
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Location of Components (Electrical System)
R2900 Load Haul Dump Parking Brake Manual Release
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Turbocharger - Assemble
2002/11/18 A New Grade Sensor for the Topcon System Five is Available {7219, 7220}
14H Motor Grader 3176C Engine Supplement Rear Chassis Support - Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Water Pump - Disassemble