RM-350B Road Reclaimer/Soil Stabilizer Caterpillar


Hydraulic System Oil - Change

Usage:

RM-350B AXW
Cleanliness must be a priority when you change the hydraulic oil. Change the oil in a clean work area. Use clean tools. Make sure that you have clean hands. Clean the outside of the hydraulic tank before you start to operate the machine.

------ WARNING! ------

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.

----------------------



    Illustration 1g00870139

  1. Remove the drain plug from the bottom of the hydraulic tank. Open the valve. Drain the oil to a suitable container. Allow the oil to drain until the hydraulic tank is empty.

  1. Pour a small amount of hydraulic oil in the tank. Clean the bottom of the tank.

  1. Install the drain plug. Close the valve.

  1. Fill the hydraulic tank with clean, approved hydraulic oil.

Caterpillar Information System:

824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train MID 081 - CID 1757 - FMI 04
C-9 Engine for the 12H Motor Grader System Configuration Parameters
773E Off-Highway Truck Engine Supplement Aftercooler - Remove
3176C and 3196 Engines for Caterpillar Built Machines Engine Misfires, Runs Rough or Is Unstable
824G Series II Wheel Tractor, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Electrohydraulic System Electrohydraulic Control (Joystick)
RM-350B Road Reclaimer/Soil Stabilizer Fuel Tank Cap Filter and Strainer - Replace/Clean
2002/03/04 Correction to Special Instruction , "Repair Procedures for the Chassis" {7000, 7509}
3126B Engine for 570B and 580B Wheel Harvesters Sensors and Electrical Connectors
N3 Series Brushless Alternators Alternator - Disassemble
N3 Series Brushless Alternators Alternator - Assemble
RM-350B Road Reclaimer/Soil Stabilizer Fuel System - Prime
2002/03/11 Sealant has been Applied to the Gasket on the Steering Pump in order to Prevent Leaks {4306, 5073}
RM-350B Road Reclaimer/Soil Stabilizer Rotor Door Control
2002/05/27 New Rotary Position Sensors Are Used {1400}
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab Heater Assembly - Disassemble
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab Heater Assembly - Assemble
824G Series II Wheel Tractor, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Electrohydraulic System Main Control Valve
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System Piston Pump (Hydraulic Fan)
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System ARC - Replace
Alternator - Delco 27SI Regulator - Test
3126B Engine for 570B and 580B Wheel Harvesters Can Not Reach Top Engine RPM
RM-350B Road Reclaimer/Soil Stabilizer Load Controller
554 Forwarder and 574 Forwarder Parking
773E Off-Highway Truck Engine Supplement Aftercooler - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.