Correction to Special Instruction , "Repair Procedures for the Chassis" {7000, 7509}
- Off-Highway Truck/Tractor:
- 776 (S/N: 14H1-UP)
- 776B (S/N: 6JC1-UP)
- 776C (S/N: 2TK1-UP)
- 776D (S/N: 5ER1-UP; AFS1-UP)
- 777 (S/N: 84A1-UP)
- 777B (S/N: 4YC1-UP)
- 777C (S/N: 4XJ1-UP)
- 777D (S/N: 3PR1-UP; AGC1-UP)
- 777D HAA (S/N: 2YW1-UP; AGY1-UP)
- 784B (S/N: 5RK1-UP)
- 784C (S/N: 2PZ1-UP)
- 785 (S/N: 8GB1-UP)
- 785B (S/N: 6HK1-UP)
- 785C (S/N: 1HW1-UP; APX1-UP)
- 785C HAA (S/N: 5AZ1-UP)
- 789 (S/N: 9ZC1-UP)
- 789B (S/N: 7EK1-UP)
- 789C (S/N: 2BW1-UP)
- 793 (S/N: 3SJ1-UP)
- 793B (S/N: 1HL1-UP)
- 793C (S/N: 4AR1-UP; 4GZ1-UP; ATY1-UP)
Show/hide table
Illustration 1 | g00870047 |
Stiffener Plate See Table 14 for dimensions. |
Show/hide table
Dimensions for Stiffener Plates     | |||
---|---|---|---|
Dimension     | Size for 784B, 784C, 785, 785B, and 785C     | Size for 789,789B, and 789C     | Size for 793, 793B, and 793C     |
A     | 1690.0 mm (66.54 inch)     |
1800.0 mm (70.87 inch)     |
2000.0 mm (78.74 inch)     |
B     | 50.0 mm (1.97 inch)     |
50.0 mm (1.97 inch)     |
50.0 mm (1.97 inch)     |
C     | 600.0 mm (23.62 inch)     |
600.0 mm (23.62 inch)     |
600.0 mm (23.62 inch)     |
D     | 150.0 mm (5.90 inch)     |
150.0 mm (5.90 inch)     |
150.0 mm (5.90 inch)     |
E     | 50.0 mm (1.97 inch)     |
50.0 mm (1.97 inch)     |
50.0 mm (1.97 inch)     |
F     | 845.0 mm (33.27 inch)     |
900.0 mm (35.43 inch)     |
900.0 mm (35.43 inch)     |
G     | 400.0 mm (15.75 inch) Radius     |
300.0 mm (11.81 inch) Radius     |
300.0 mm (11.81 inch) Radius     |
H     | 450.0 mm (17.72 inch) Radius     |
497.5 mm (19.59 inch) Radius     |
555.0 mm (21.85 inch) Radius     |
I     | 15 Degrees     | 15 Degrees     | 15 Degrees     |
J     | 368.0 mm (14.49 inch)     |
418.0 mm (16.46 inch)     |
468.0 mm (18.43 inch)     |
Caterpillar Information System:
3126B Engine for 570B and 580B Wheel Harvesters Sensors and Electrical Connectors
N3 Series Brushless Alternators Alternator - Disassemble
N3 Series Brushless Alternators Alternator - Assemble
RM-350B Road Reclaimer/Soil Stabilizer Fuel System - Prime
2002/03/11 Sealant has been Applied to the Gasket on the Steering Pump in order to Prevent Leaks {4306, 5073}
797 Off-Highway Truck Steering System Steering System
24H Motor Grader Steering Frame Lock
RM-350B Road Reclaimer/Soil Stabilizer Fan Drive Bearing and Belt Tightener - Lubricate
RM-350B Road Reclaimer/Soil Stabilizer Engine Water Pump - Inspect
797 and 797B Off-Highway Truck Power Train Electronic Control System Directional Shift Management Function
797 and 797B Off-Highway Truck Power Train Electronic Control System Controlled Throttle Shifting Function
797 and 797B Off-Highway Truck Power Train Electronic Control System Top Gear Function
RM-350B Road Reclaimer/Soil Stabilizer Fuel Tank Cap Filter and Strainer - Replace/Clean
824G Series II Wheel Tractor, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Electrohydraulic System Electrohydraulic Control (Joystick)
3176C and 3196 Engines for Caterpillar Built Machines Engine Misfires, Runs Rough or Is Unstable
773E Off-Highway Truck Engine Supplement Aftercooler - Remove
C-9 Engine for the 12H Motor Grader System Configuration Parameters
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train MID 081 - CID 1757 - FMI 04
RM-350B Road Reclaimer/Soil Stabilizer Hydraulic System Oil - Change
RM-350B Road Reclaimer/Soil Stabilizer Rotor Door Control
2002/05/27 New Rotary Position Sensors Are Used {1400}
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab Heater Assembly - Disassemble
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab Heater Assembly - Assemble
824G Series II Wheel Tractor, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Electrohydraulic System Main Control Valve