RM-350B Road Reclaimer/Soil Stabilizer Caterpillar

Show/hide table

Personal injury or death can result from a fire. Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. Clean up all leaked or spilled fuel. Do not smoke while working on the fuel system. Turn the disconnect switch OFF or disconnect the battery when changing fuel filters.

Illustration 1	g00870045

Illustration 2	g00100213

1. Lift the lever (5) and turn the lever (5) counterclockwise until the lever stops. Remove the cap.

2. Inspect seal (4) for damage. Replace the seal, if necessary.

3. Remove screws (1), filter assembly (2), drain valve (3) and gaskets.

4. Remove the strainer that is located in the filler opening.

5. Wash the strainer and the fuel tank cap in a clean, nonflammable solvent.

6. Install a new cap filter kit. Install the gaskets, drain valve (3), filter assembly (2), and screws (1) .

7. Install a new cap filter kit. Install the gaskets, drain valve (3), filter assembly (2), and screws (1) .

8. Apply a thin film of fuel to the gasket of the fuel tank cap.

9. Install the fuel tank cap.

Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for information that pertains to containing fluid spillage.