Release the accelerator. The machine will stop automatically.
Move the direction selector to the NEUTRAL position.
Press the parking brake switch in order to apply the parking brake. This will also lower the ladder.
Place the boom into the stored position. When the machine is not loaded, the grapple must be resting on the rear frame and the joint must be resting on the brace, as shown. When the machine is loaded, the grapple must be resting on the top of the logs, as shown.
Illustration 1 | g00870314 |
Stored position without a load |
Illustration 2 | g00887499 |
Stored position with a load |
Turn the engine start switch to the OFF position and remove the key.
Turn off the battery disconnect switch and the secondary disconnect switch.
Reference: Refer to Operation and Maintenance Manual, "Battery Disconnect Switch" and Operation and Maintenance Manual, "Secondary Disconnect Switch" for more information.