Plate Locations and Film Locations
The Product Identification Number (PIN) will be used to identify a powered machine that is designed for an operator to ride.
Caterpillar products such as engines, transmissions and major attachments that are not designed for an operator to ride are identified by Serial Numbers.
The certification label (if equipped) is used to verify an engine's conformance to the emissions requirements of the EPA.
For quick reference, record the identification numbers in the spaces that are provided below the illustration.
Product Identification Number (PIN)
Show/hide table
Illustration 1 | g00852905 |
Machine PIN ____________________
Serial Number Plate (SN)
Show/hide table
Illustration 2 | g00852908 |
Service Information Number Plate (SIN)
Show/hide table
Illustration 3 | g00639252 |
Engine Serial Number ____________________
Show/hide table
Illustration 4 | g00852909 |
Engine Information Plate
Show/hide table
Illustration 5 | g00852910 |
Governor Information Plate
Caterpillar Information System:
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hydraulic Fan Valve
3306C Engines for Caterpillar Built Machines Alternator and Regulator
2002/01/21 A New Fuel Tank Group Improves Serviceability {1273}
CB-634D Vibratory Compactor Machine Systems Piston Motor (Vibratory) - Install
570B Wheel Harvester and 580B Wheel Harvester Engine Supplement Radiator Group - Install
CB-634D Vibratory Compactor Machine Systems Piston Motor (Vibratory) - Remove
834G Wheel Tractor and 836G Landfill Compactor Engine Supplement Air Cleaner - Install
CB-634D Paving Compactor Seat Belt - Replace
MT735, MT745, MT755 and MT765 Agricultural Tractors Engine Supplement Crankshaft Front Seal - Remove and Install
CB-634D Vibratory Compactor Machine Systems Piston Motor (Drum Propel) - Install
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Ride Control
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Load Check
CB-634D Vibratory Compactor Machine Systems Gear Pump (Steering) - Remove
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
2002/10/07 A New Seal with Increased Serviced Life is Used in the Front Suspension Cylinder {7200, 7201}
14H Motor Grader Transmission and Differential Oil - Change
69D, 73D, 769C, 769D, 773B, 773D, 773E, 776B, 776C, 776D, 777B, 777C, 777D, 784B, 785, 785B, 789 and 793 Off-Highway Truck/Tractors and 771D, 775B, 775D and 775E Quarry Trucks Payload System Wiring Harness (Open Circuit) - Test
69D, 73D, 769C, 769D, 773B, 773D, 773E, 776B, 776C, 776D, 777B, 777C, 777D, 784B, 785, 785B, 789 and 793 Off-Highway Truck/Tractors and 771D, 775B, 775D and 775E Quarry Trucks Payload System Wiring Harness (Short Circuit) - Test
14H and 16H Motor Graders Air System and Brakes Air Compressor
773E Off-Highway Truck Power Train Differential and Bevel Gear
CB-634D Vibratory Compactor Machine Systems Gear Pump (Steering) - Install
834G Wheel Tractor and 836G Landfill Compactor Engine Supplement Fan Shroud - Install
14H Motor Grader Transmission and Differential Oil Filter and Screens - Replace/Clean
CB-634D Vibratory Compactor Machine Systems Brake and Shift Valve - Remove