Radiator Group - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 2     |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Attach Tooling (A) in the holes for bolts (10) and (13). Attach a suitable lifting device to Tooling (A) and position the radiator group to the machine. The weight of the radiator group is approximately 118 kg (260 lb).
Show/hide table
Illustration 1 | g00948490 |
- Install bolts (15) in order to secure the radiator group to the machine. Remove Tooling (A) and install bolts (10) and (13) .
- Connect hose (14), hose (12), and hose (11) to the radiator group.
- Connect hose (9) and hose (8) to the radiator group.
Show/hide table
Illustration 2 | g00948485 |
- Connect hose assemblies (6) and hose assemblies (5). Install clips (7) .
Show/hide table
Illustration 3 | g00948480 |
- Install bolts (3) in order to attach guard (4) to the radiator group.
Show/hide table
Illustration 4 | g00948478 |
- Install bolts (1) in order to attach guards (2) to the radiator group.
- Raise the bottom guard. For additional information, refer to Operation and Maintenance Manual, "Bottom Guard Lowering".
- Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" or Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change". The capacity of the cooling system is approximately 50 L (13 US gal).
Caterpillar Information System:
CB-634D Vibratory Compactor Machine Systems Piston Motor (Vibratory) - Remove
834G Wheel Tractor and 836G Landfill Compactor Engine Supplement Air Cleaner - Install
CB-634D Paving Compactor Seat Belt - Replace
MT735, MT745, MT755 and MT765 Agricultural Tractors Engine Supplement Crankshaft Front Seal - Remove and Install
CB-634D Vibratory Compactor Machine Systems Piston Motor (Drum Propel) - Install
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Ride Control
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Load Check
14H Motor Grader Transmission and Differential Oil Level - Check
CB-634D Paving Compactor Rollover Protective Structure (ROPS) - Inspect
CB-634D Paving Compactor Ring Bearing - Lubricate
120H and 135H Motor Graders Air System and Brakes Governor (Air Compressor)
16H Motor Grader Final Drive Preload - Check
CB-634D Vibratory Compactor Machine Systems Piston Motor (Vibratory) - Install
2002/01/21 A New Fuel Tank Group Improves Serviceability {1273}
3306C Engines for Caterpillar Built Machines Alternator and Regulator
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hydraulic Fan Valve
CB-634D Paving Compactor Plate Locations and Film Locations
CB-634D Vibratory Compactor Machine Systems Gear Pump (Steering) - Remove
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
2002/10/07 A New Seal with Increased Serviced Life is Used in the Front Suspension Cylinder {7200, 7201}
14H Motor Grader Transmission and Differential Oil - Change
69D, 73D, 769C, 769D, 773B, 773D, 773E, 776B, 776C, 776D, 777B, 777C, 777D, 784B, 785, 785B, 789 and 793 Off-Highway Truck/Tractors and 771D, 775B, 775D and 775E Quarry Trucks Payload System Wiring Harness (Open Circuit) - Test
69D, 73D, 769C, 769D, 773B, 773D, 773E, 776B, 776C, 776D, 777B, 777C, 777D, 784B, 785, 785B, 789 and 793 Off-Highway Truck/Tractors and 771D, 775B, 775D and 775E Quarry Trucks Payload System Wiring Harness (Short Circuit) - Test
14H and 16H Motor Graders Air System and Brakes Air Compressor