Final Drive Preload - Check
Show/hide table
| Required Tools | ||
| Part Number | Part Description | Qty |
| 5P-4201 | Wrench | 1 |
| 9U-5015 | Torque Wrench Gp (3/4 Inch Drive) | 1 |
Show/hide table
| Bearing Preload for the Final Drive | |
|---|---|
| Sales Model | Final Torque |
| 16H | |
- Park the machine on a level surface.
- Refer to the Operation and Maintenance Manual, "Jacking Locations" for the proper lifting points. Support the machine so that the rear tires are off the ground. The machine must be in a stable position in order to be able to turn the rear tires.
- Unlock the differential.
- Stop the engine.
- Drain the oil below the level of the outer cover.
Show/hide table
Illustration 1 g00798247 - Remove outer cover (1).
Show/hide table
Illustration 2 g00798244 - Remove lock (2).
Show/hide table
Illustration 3 g00798248 - Install wrench (A) to the torque wrench. Refer to Table 1.
- Check the torque. Refer to Table 2.
- If the torque is incorrect, refer to the adjustment procedure in Systems Operation, Testing and Adjusting, "Final Drive Bearings - Adjust" for the Power Train System.
Caterpillar Information System:
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader System Configuration Parameters
CB-634D Paving Compactor Radiator Core - Clean
CB-634D Paving Compactor Operator Platform - Lubricate
416D Less Backhoe Backhoe Controls
CB-634D Paving Compactor Hydraulic Tank Screen - Clean
2002/01/14 A Special Instruction is Available for A New Routing of Hoses for Tilt Log Loaders {5057}
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Speedometer
CB-634D Paving Compactor Hydraulic Tank Vent - Replace
834G Wheel Tractor and 836G Landfill Compactor Engine Supplement Electric Starting Motor - Install
CB-634D Paving Compactor Hydraulic System Oil Sample - Obtain
CB-634D Vibratory Compactor Machine Systems Piston Motor (Drum Propel) - Remove
CB-634D Paving Compactor Hydraulic System Oil Level - Check
120H and 135H Motor Graders Air System and Brakes Governor (Air Compressor)
CB-634D Paving Compactor Ring Bearing - Lubricate
CB-634D Paving Compactor Rollover Protective Structure (ROPS) - Inspect
14H Motor Grader Transmission and Differential Oil Level - Check
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Load Check
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Ride Control
CB-634D Vibratory Compactor Machine Systems Piston Motor (Drum Propel) - Install
MT735, MT745, MT755 and MT765 Agricultural Tractors Engine Supplement Crankshaft Front Seal - Remove and Install
CB-634D Paving Compactor Seat Belt - Replace
834G Wheel Tractor and 836G Landfill Compactor Engine Supplement Air Cleaner - Install
CB-634D Vibratory Compactor Machine Systems Piston Motor (Vibratory) - Remove
570B Wheel Harvester and 580B Wheel Harvester Engine Supplement Radiator Group - Install