Correction to Specifications , "Steering Gear" {4310}
- Off-Highway Truck/Tractor:
- 784C (S/N: 2PZ1-UP)
- 785C (S/N: 1HW1-UP; APX1-UP)
- 785C HAA (S/N: 5AZ1-UP)
The information that is in this section is incorrect. Replace this section with the following information.
Steering Gear
Show/hide table
Illustration 1 | g00850510 |
(1) Torque for bolts ... 102 ± 2 N·m (75 ± 2 lb ft)
(2) Apply 9S-3263 Thread Lock Compound to the threads.
(3) Torque for nut ... 82 ± 5 N·m (60 ± 4 lb ft)
From the center position, the tilt steering column can be moved in either direction.
-
(4) Up ... 21 degrees (5) Down ... 14 degrees
Caterpillar Information System:
3126B Engine for Caterpillar Built Machines System Overview
533 Wheel Feller Buncher and 543 Wheel Feller Buncher Power Train Drive Shaft (Machine)
TH103 Telehandler Hydraulic System Pressure for Pump and Relief Valve (Main) - Test and Adjust
2001/12/17 A New Retaining Clip will Improve the Alignment of the Hose Assembly on the Condenser {1374, 1808, 5057, 7320}
CB-534D, CB-534D XW and CB-564D Vibratory Compactors Machine Systems Water Spray Pump - Assemble
CB-534D, CB-534D XW and CB-564D Vibratory Compactors Machine Systems Water Spray Pump - Disassemble
533 Wheel Feller Buncher and 543 Wheel Feller Buncher Power Train Transmission Gearbox
2001/12/17 Correction to Specifications , "Steering Gear" {4310}
CB-634D Paving Compactor Belts - Inspect/Adjust/Replace
PM-465 Cold Planer Fuel System Primary Filter - Clean/Inspect/Replace
533 Wheel Feller Buncher and 543 Wheel Feller Buncher Power Train Pressure Reducing Valve (Speed Control Regulator)
120H and 135H Motor Graders Power Train Air Conditioner
570B Wheel Harvester and 580B Wheel Harvester Engine Supplement Crankshaft Front Seal - Remove and Install - Engine in Chassis
CB-634D Paving Compactor Cooling System Coolant (ELC) - Change
PM-465 Cold Planer Fuel System Secondary Filter - Replace
TH103 Telehandler Hydraulic System Access Platform - Test and Adjust
570B Wheel Harvester and 580B Wheel Harvester Engine Supplement Fan Drive Pulley - Remove and Install
533 Wheel Feller Buncher and 543 Wheel Feller Buncher Power Train Bevel Gear and Pinion
PM-465 Cold Planer Fuel Tank Cap and Strainer - Clean
3054 Engine for Caterpillar Built Machines Cylinder Head - Remove
3054 Engine for Caterpillar Built Machines Cylinder Head - Install
3054 Engine for Caterpillar Built Machines Crankshaft - Remove
3054 Engine for Caterpillar Built Machines Crankshaft - Install
TH350B, TH355B, TH360B and TH460B Telehandlers Reference Material