Cutting Edges (Leveling Blade) - Inspect/Replace
Show/hide table
 |
|
Personal injury or death can result if the levelling blade is not blocked up. Block the levelling blade before changing the cutting edge. |
Show/hide table
| |
| Illustration 1 | g00364692 |
Replace the cutting edge if the cutting edge is damaged. Replace the cutting edge if the cutting edge is excessively worn.
- Raise the leveling blade. Block the leveling blade securely.
In order to change the cutting edge, block the blade at a level that is just high enough to change the cutting edge.
- Remove the bolts. Remove the cutting edge.
- Clean the contact surfaces.
- If the opposite edge of the cutting edge is not worn, use the opposite edge. If the opposite edge is worn, replace the cutting edge.
- Install the bolts. Tighten the bolts to the torques that are specified in the Operation and Maintenance Manual, "Torques for Ground Engaging Tool Bolts".
- Raise the leveling blade. Remove the blocks.
- Lower the leveling blade to the ground.
- Check the bolts for proper torque after a few hours of operation.
Caterpillar Information System:
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bucket Cylinder (Extendable Stick)
2001/10/08 Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
CP-563C and CS-563C Vibratory Compactors Cooling System Coolant Extender (ELC) - Add
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bucket Cylinder (Extendable Stick)
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Fan Drive - Remove
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0417 - FMI 06
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0417 - FMI 05
CP-563C and CS-563C Vibratory Compactors Cooling System Coolant (ELC) - Change
CP-563C and CS-563C Vibratory Compactors Belts - Inspect/Adjust/Replace
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0417 - FMI 03
CP-563C and CS-563C Vibratory Compactors Articulating and Oscillating Bearings - Lubricate
424D, 428D and 438D Backhoe Loaders Fuel Tank Water and Sediment - Drain
2001/10/15 A New Owners Manual is Now Available {1000, 7000}
TL5 Series Field Cultivator Troubleshooting
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Axle) Oil - Change
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Transmission Oil Level - Check
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0418 - FMI 03
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Fan Drive - Install
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Axle) Oil Level - Check
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Axle) Oil Sample - Obtain
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Drum) Oil - Change
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train Temperature Switch (Axle Oil)
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Radiator - Install
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Drum) Oil - Check