416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Caterpillar


Bucket Cylinder (Extendable Stick)

Usage:

416D B2D



Illustration 1g00833044

206-0518 Bucket Cylinder (Extendable Stick)

(1) Diameter of the hole ... 45.20 ± 0.05 mm (1.780 ± 0.002 inch)

(2) Diameter of the cylinder ... 88.90 ± 0.08 mm (3.500 ± 0.003 inch)

(3) Diameter of the rod ... 63.450 ± 0.038 mm (2.4980 ± 0.0015 inch)

(4) Before assembly, lubricate the sealing lip with the fluid that is being sealed.

(5) After assembly, the bearings can not extend beyond the surfaces of the rod.

Diameter of the bearing before installation ... 50.302 ± 0.020 mm (1.9804 ± 0.0008 inch)

(6) Before assembly, lubricate the threads with clean grease.

Diameter of the lands ... 63.78 ± 0.03 mm (2.511 ± 0.001 inch)
Torque for the head ... 600.0 ± 130.0 N·m (440.00 ± 95.00 lb ft)

Caterpillar Information System:

3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Fan Drive - Remove
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0417 - FMI 06
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0417 - FMI 05
CP-563C and CS-563C Vibratory Compactors Cooling System Coolant (ELC) - Change
CP-563C and CS-563C Vibratory Compactors Belts - Inspect/Adjust/Replace
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0417 - FMI 03
CP-563C and CS-563C Vibratory Compactors Articulating and Oscillating Bearings - Lubricate
424D, 428D and 438D Backhoe Loaders Fuel Tank Water and Sediment - Drain
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0391 - FMI 06
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Piston Pump (Hydraulic Fan)
CP-563C and CS-563C Vibratory Compactors Capacities (Refill)
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0391 - FMI 05
CP-563C and CS-563C Vibratory Compactors Cooling System Coolant Extender (ELC) - Add
2001/10/08 Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bucket Cylinder (Extendable Stick)
CP-563C and CS-563C Vibratory Compactors Cutting Edges (Leveling Blade) - Inspect/Replace
2001/10/15 A New Owners Manual is Now Available {1000, 7000}
TL5 Series Field Cultivator Troubleshooting
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Axle) Oil - Change
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Transmission Oil Level - Check
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0418 - FMI 03
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Fan Drive - Install
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Axle) Oil Level - Check
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Axle) Oil Sample - Obtain
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.