Temperature Switch (Axle Oil)
Show/hide table
Illustration 1 | g00536205 |
(1) Torque for the installation of the temperature switch ... 22 ± 2 N·m (16 ± 1 lb ft)
The contacts are normally open below the deactuation temperature.
Actuation temperature ... 65° ± 3°C (150° ± 37°F)
Minimum deactuation temperature ... 58 °C (135 °F)
Caterpillar Information System:
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Drum) Oil - Change
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Axle) Oil Sample - Obtain
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Axle) Oil Level - Check
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Fan Drive - Install
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0418 - FMI 03
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Transmission Oil Level - Check
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Axle) Oil - Change
TL5 Series Field Cultivator Troubleshooting
2001/10/15 A New Owners Manual is Now Available {1000, 7000}
CP-563C and CS-563C Vibratory Compactors Cutting Edges (Leveling Blade) - Inspect/Replace
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bucket Cylinder (Extendable Stick)
2001/10/08 Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Radiator - Install
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Drum) Oil - Check
3408E and 3412E Engines for Caterpillar Built Machines Balancer Group - Remove
3408E and 3412E Engines for Caterpillar Built Machines Balancer Group - Install
TH350B, TH355B, TH360B and TH460B Telehandlers Battery Disconnect Switch - If Equipped
740 and 740 EJECTOR Articulated Trucks Power Train Output Transfer Gears - Assemble
TL5 Series Field Cultivator Transporting the Implement
2001/11/26 New Control Software for the Chassis ECM is Used {7620}
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0418 - FMI 05
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Engine and Torque Converter - Install
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System Ride Control Accumulator - Test and Charge
A Process is Available to Replace the Propel Lever Group{3209, 5462} A Process is Available to Replace the Propel Lever Group{3209, 5462}