Assembly Procedure
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Note: Check the O-ring seals, the gaskets and the seals for wear or for damage. Replace the components, if necessary.
- Install the following components to base assembly (12) : retainer (7), spacer (8), spring (9), seat (10) and bolt (11) .
Illustration 1 | g00833386 |
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Install plungers (5). Install springs (6) .
Illustration 2 | g00833380 |
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Install valve (3). Install spring (4) .
- Install the O-ring seal to each cover, if necessary. Install covers (1). Install tube assembly (2) .
Illustration 3 | g00833349 |
End By: Install the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter Base - Install".