Engine Starting
Show/hide table
To prevent personal injury, be sure all personnel are clear of the machine. Sound the horn for several seconds before starting the engine. |
Show/hide table
NOTICE |
---|
Keep engine speed low until the engine oil pressure registers on the gauge or the engine oil indicator light goes out. If the gauge does not register or the light does not go out within ten seconds, stop the engine and investigate the cause before starting again. Failure to do so, can cause engine damage. |
Show/hide table
Illustration 1 | g00351043 |
- Move vibratory control (3) to the OFF position.
- Move propel control (1) to the STOP position.
- Push parking brake knob (2) downward.
Show/hide table
Illustration 2 g00351045 - Pull throttle control (4) outward for
38 mm (1.5 inch) . Lock the throttle in position. - In order to crank the engine, turn key (5) to the START position. When the engine starts, release the key.
Caterpillar Information System:
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Stabilizer Cylinder
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0190 - FMI 02
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Air Filter Restriction Lamp - Test
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Stabilizer Cylinder
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader E100 Low Engine Oil Pressure Warning
2001/10/15 New Tooling Is Available For The Assembly Of the Slack Adjusters {4261}
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Engine and Torque Converter - Remove
3176C, 3196 and 3406E Engines for Caterpillar Built Machines E096 High Fuel Pressure
CP-563C and CS-563C Vibratory Compactors Seat
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Lower) - Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Lower) - Remove
SR4 Generator with VR3 or VR4 Voltage Regulator Lead Connections
Machine Security System Software - Uninstall - "Immobilizer" Feature
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Engine Shutdown Switch Circuit - Test
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Stabilizer Cylinder
SR4 Generator with VR3 or VR4 Voltage Regulator General Information
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0346 - FMI 03
SR4 Generator with VR3 or VR4 Voltage Regulator Service Tools
SR4 Generator with VR3 or VR4 Voltage Regulator Troubleshooting
CP-563C and CS-563C Vibratory Compactors Engine Starting with Jump Start Cables
CP-563C and CS-563C Vibratory Compactors Engine and Machine Warm-Up
TL5 Series Field Cultivator Safety Signs and Labels
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader E190 Engine Overspeed Warning