Vibratory Support - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 6V-2082     | 起吊钩     | 1     |
B     | 6V-2082     | 起吊钩     | 1     |
138-7574 | 连杆支架     | 1     |
- 将适当的起吊设备和工具 (B) 连接到振动支架壳体 (6) 上。 安装振动支架壳体和螺栓 (13) 。 振动支架壳体的重量约为 41 kg (90 lb)。
Show/hide table
图 1 | g00825171 |
- 将安装件 (11) 安装到板 (12) 上,然后安装螺栓。
Show/hide table
图 2 | g00825169 |
- 将适当的起吊设备和工具 (A) 连接到板组件 (9) 上,然后安装板组件和螺栓 (10) 。 板组件的重量约为 122 kg (269 lb)。
Show/hide table
图 3 | g00825167 |
- 将振动轴 (8) 安装到振动支架壳体 (6) 中。
Show/hide table
图 4 | g00825166 |
- 将振动马达 (7) 和螺栓安装到振动支架壳体 (6) 中。
Show/hide table
图 5 | g00825164 |
- 使用合适的卡箍旋转并固定振动壳体 (6) 。 将适当的起吊设备和工具 (A) 固定到支架 (4) 上。 安装支架 (4) 和螺栓 (5) 。 支架的重量为 38 kg (84 lb)。
Show/hide table
图 6 | g00825162 |
- 拆下卡箍。 使用合适的卡箍 (1) 旋转并固定振动支架壳体。 将适当的起吊设备和工具 (A) 固定到支架 (2) 上。 安装支架 (2) 和螺栓 (3) 。 支架的重量为 38 kg (84 lb)。 拆下合适的卡箍 (1) 。
Show/hide table
图 7 | g01066671 |
- 向振动支架壳体中加注机油。 振动支架壳体的容量为 2.4 L (0.6 US gal)。 请参阅操作和保养手册, "振动支架油 - 更换"。
End By: 安装钢轮组件。 请参阅 拆解和装配, "钢轮 - 安装"。
Caterpillar Information System:
2002/04/01 Intervals for Service Inspection {5077, 5081}
CS56B, CP56B, CS66B, CS68B and CP68B Vibratory Soil Compactors Machine Systems Vibratory Support - Assemble
2001/09/17 Correction to Systems Operation , "Monitoring System" {7490}
CP-433E, CS-423E and CS-433E Paving Compactors Sampling Interval and Location of Sampling Valve
CS56B, CP56B, CS66B, CS68B and CP68B Vibratory Soil Compactors Machine Systems Vibratory Support - Disassemble
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks E038 Low Engine Coolant Temperature Warning
2001/11/19 Prerequisites for Flashing Software into Machine Electronic Control Modules {7620}
PM-465 Cold Planer Maintenance Interval Schedule
2001/10/01 New Torque Procedure for the Bushings that Retain the Fuel Injection Pumps (Disassembly and Assembly Manuals) {1251}
797 Off-Highway Truck Steering System Accumulator Charging Valve
2001/10/01 New Torque Procedure for the Bushings that Retain the Fuel Injection Pumps (Testing and Adjusting Manuals) {1251}
CP-433E, CS-433E and CS433E Vibratory Soil Compactors Propel System Axle
120H and 135H Motor Graders Machine Systems Blower Motor (Air Conditioner and Heater) - Remove and Install
216, 226 and 228 Skid Steer Loaders Machine Systems Piston Pump
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Event Codes
3126B Engine for Caterpillar Built Machines Throttle Lock Lamp Circuit - Test
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Electric Drive Pump (Prelubrication) - Remove
C-9 Engines for Caterpillar Built Machines Alternator and Regulator
CB-534C Vibratory Compactor Sound Information and Vibration Information
CB-534C Vibratory Compactor Specifications
CP-433E, CS-423E and CS-433E Vibratory Compactors Machine Systems Piston Motor (Vibratory) - Remove
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Unit Injector Hydraulic Pump - Remove
CB-534C Vibratory Compactor Plate Locations and Film Locations
CB-534C Vibratory Compactor Engine Starting