Measuring Arm Cylinder
156-3852 Measuring Arm Cylinder
Show/hide table
Illustration 1 | g00760011 |
(1) Lubricate the sealing lips with a minimal amount of the lubricant that is being sealed.
(2) Apply 4C-4032 Bearing Mount Compound to threads.
Show/hide table
Component Data Measuring Arm Cylinder     | ||
Item     | Part Number     | 156-3852     |
3     | Bore Diameter     | 25 mm (1.0 inch)     |
4     | Head Pin Diameter     | 12 mm (0.47 inch)     |
5     | Rod Pin Diameter     | 12 mm (0.47 inch)     |
6     | Rod Diameter     | 16 mm (0.63 inch)     |
-     | Closed Length     | 195 mm (7.68 inch)     |
-     | Stroke     | 50 mm (1.97 inch)     |
206-4594 Measuring Arm Cylinder
Show/hide table
Illustration 2 | g00827056 |
(1) Lubricate the sealing lips with a minimal amount of the lubricant that is being sealed.
(2) Apply 4C-4032 Bearing Mount Compound to threads.
Torque for the bolt ... 277 N·m (200 lb ft)
(2A) Apply 9S-3263 Thread Lock Compound to threads.
Show/hide table
Component Data Measuring Arm Cylinder     | ||
Item     | Part Number     | 206-4594     |
3     | Bore Diameter     | 25 mm (1.0 inch)     |
4     | Head Pin Diameter     | 12 mm (0.47 inch)     |
5     | Rod Pin Diameter     | 12 mm (0.47 inch)     |
6     | Rod Diameter     | 16 mm (0.63 inch)     |
-     | Closed Length     | 195 mm (7.68 inch)     |
-     | Stroke     | 50 mm (1.97 inch)     |
Caterpillar Information System:
PM-465 Cold Planer Engine and Machine Warm-Up
740 and 740 EJECTOR Articulated Trucks Power Train Torque Converter - Disassemble
2001/08/13 Installing and Removing Flex Pins for the Retention of Bucket Teeth {6800, 6803, 6805, 6822}
TH210 and TH215 Telehandlers Longitudinal Stability Indicator System General Information
793B Off-Highway Truck Air System and Brakes Air System
3500B Engines for 5130B and 5230B Excavators Throttle Switch
HDB Series and M1 Series Heavy Duty Brushless Alternators Field Winding - Test
120H and 135H Motor Graders Wheel Lean Bar Bearings - Lubricate
2001/08/06 The Venting System for the Axle has been Revised {3278}
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System Electrical Component and Connector Locations
2001/08/06 Be Sure To Check The Engine Crankshaft For Sequence Numbers On The Counterweights {1231}
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System Service Tools
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Piston Pump (Steering) - Disassemble
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Hydraulic System Saw Cylinder
2001/09/04 A New Coolant Level Sensor Is Available {7422}
2001/09/10 Version 2.1.3 of the VIMSpc2001 Software is Now Available {7601}
3500B Engines for 5130B and 5230B Excavators User Defined Shutdown Input
TK1051 Track Feller BuncherEngine Supplement Water Pump - Remove - Engine in Chassis
PM-465 Cold Planer Machine Interlocks
216, 226, 232 and 242 Skid Steer Loaders Machine Systems Piston Pump
CP-433E, CS-423E and CS-433E Vibratory Compactors Engine Supplement Radiator - Remove and Install
CP-433E, CS-423E and CS-433E Vibratory Compactors Engine Supplement Hydraulic Oil Cooler - Remove and Install
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Piston Pump (Steering) - Assemble
2001/08/06 Torque Has Been Increased for the Cab Mounting Bolts {7266}