267, 277 and 287 Multi Terrain Loaders Engine Supplement Caterpillar

Removal Procedure

267 Multi Terrain Loader

Show/hide table



Illustration 1	g00766191

1. Release clamps (3). Remove air cleaner cover (2) from air cleaner housing (1) .

2. Remove the primary air filter and the secondary air filter from inside air cleaner housing (1) .

Show/hide table



Illustration 2	g01033182

3. Loosen clamps (4). Disconnect hose (5) .

Show/hide table



Illustration 3	g01033181

4. Remove bolts (6). Remove air cleaner housing (1) .

5. Remove service indicator (7) .

Removal Procedure

277 Multi Terrain Loader

Show/hide table



Illustration 4	g00766044

1. Release clamps (3). Remove air cleaner cover (2) from air cleaner housing (1) .

2. Remove the primary air filter and the secondary air filter from inside air cleaner housing (1) .

Show/hide table



Illustration 5	g00766054

3. Loosen clamps (4). Disconnect hose (5) .

Show/hide table



Illustration 6	g00779924

4. Remove bolts (6). Remove air cleaner housing (1) .

5. Remove service indicator (7) .

Removal Procedure

287 Multi Terrain Loader

Show/hide table



Illustration 7	g01028489

1. Release clamps (2). Remove air cleaner cover (3) from air cleaner housing (1) .

2. Remove the primary air filter and the secondary air filter from inside air cleaner housing (1) .

Show/hide table



Illustration 8	g01028490

3. Loosen clamps (6) and disconnect hose (7) .

4. Remove nuts (4) and the spacers.

5. Remove service indicator (5) .

6. Remove air cleaner housing (1) .

Installation Procedure

267 Multi Terrain Loader

Show/hide table



Illustration 9	g01033181

1. Apply Tooling (A) to the threads of service indicator (7). Install service indicator (7) into air cleaner housing (1). Tighten the service indicator until the service indicator makes contact with the base of the fitting. Tighten the service indicator by another 1/4 turn.

2. Place air cleaner housing (1) into position. Install bolts (6). Tighten bolts (6) to a torque of 19 ± 2 N·m (14 ± 1 lb ft).

Show/hide table



Illustration 10	g01033182

3. Connect hose (5). Tighten clamps (4) to a torque of 4.5 ± 1 N·m (40 ± 9 lb in).

Show/hide table



Illustration 11	g00766191

4. Install the primary air filter and the secondary air filter into air cleaner housing (1) .

5. Install air cleaner cover (2) and secure clamps (3) .

Installation Procedure

277 Multi Terrain Loader

Show/hide table



Illustration 12	g00779924

1. Apply Tooling (A) to the threads of service indicator (7). Install service indicator (7) into air cleaner housing (1). Tighten the service indicator until the service indicator makes contact with the base of the fitting. Tighten the service indicator by another 1/4 turn.

2. Place air cleaner housing (1) into position. Install bolts (6). Tighten bolts (6) to a torque of 19 ± 2 N·m (14 ± 1 lb ft).

Show/hide table



Illustration 13	g00766054

3. Connect hose (5). Tighten clamps (4) to a torque of 4.5 ± 1 N·m (40 ± 9 lb in).

Show/hide table



Illustration 14	g00766044

4. Install the primary air filter and the secondary air filter into air cleaner housing (1) .

5. Install air cleaner cover (2) and secure clamps (3) .

Installation Procedure

287 Multi Terrain Loader

Show/hide table



Illustration 15	g01028490

1. Apply Tooling (A) to the threads of service indicator (5). Install service indicator (5) into air cleaner housing (1). Tighten the service indicator until the service indicator makes contact with the base of the fitting. Tighten the service indicator by another 1/4 turn.

2. Place air cleaner housing (1) into position. Install the spacers and bolts (4). Tighten bolts (4) to a torque of 19 ± 2 N·m (14 ± 1 lb ft).

3. Connect hose (7). Tighten clamps (6) to a torque of 4.5 ± 1 N·m (40 ± 9 lb in).

Show/hide table



Illustration 16	g01028489

4. Install the primary air filter and the secondary air filter into air cleaner housing (1) .

5. Install air cleaner cover (3) and secure clamps (2) .