Product Identification Numbers (PIN) Location Guide Caterpillar


Off-Highway Truck/Tractor/Quarry Truck

Usage:

SR4BHV ADT



Illustration 1g00795776

The CE plate is located on the PIN Plate (1) when required.

PIN Plate (1) is located on the frame in front of the front left tire.

The Service Information Number plate (2) is located in the operator compartment on the steering console.

The serial number plate (3) is located on the left side of the engine block. Or on the rear right side of the rail that supports the engines.

Caterpillar Information System:

12H Motor Grader Final Drive Preload - Check
2001/06/18 The Bearing Assembly for the Transfer Gear Assembly Has Changed {3159}
TK1051 Track Feller Buncher Machine Systems Swing Drive
966G Wheel Loader and 972G Wheel Loader Hydraulic System Solenoid Valve (Quick Coupler)
2001/08/20 A Suction Tube has been Added to the Hydraulic Tank {5056}
TK1051 Track Feller Buncher Machine Systems Control Valve (Saw Motor)
Product Identification Numbers (PIN) Location Guide Excavator (Mining)
TK1051 Track Feller Buncher Machine Systems Control Valve (Felling Head)
AP-1050B and BG-245C Asphalt Pavers Hydraulic System Oil Sample - Obtain
12H Motor Grader Engine Oil Sample - Obtain
Product Identification Numbers (PIN) Location Guide General Information
TK1051 Track Feller Buncher Reference Material
2001/09/04 Improved Sleeve Bearings Are Available For The Brake Cooling Pumps on Certain Off-Highway Trucks {5073}
12H Motor Grader Fuel System Water Separator Element - Replace
TK1051 Track Feller Buncher Engine Starting with Jump Start Cables
TH103 Telehandler Hydraulic System Load Control Valve (Telescoping Cylinder)
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Engagement Pressure for the Transmission Clutch - Calibrate
2001/05/14 Plated Hardware Requires Lower Torque {4201, 4208, 4209}
3176C Engine for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Control Valve
TH103 Telehandler Hydraulic System Bank Valve
247 and 257 Multi Terrain Loaders Machine Systems Hydraulic System Troubleshooting
247 and 257 Multi Terrain Loaders Machine Systems Hydrostatic System Troubleshooting
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Relief Valve (Hoist)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.