120H and 135H Motor Graders Caterpillar

Moldboard Wear Strip - Inspect/Adjust/Replace

Usage:

120H 124

Putar blade. Posisikan blade pada sudut 90 derajat terhadap rangka. Turunkan blade ke permukaan tanah. Matikan engine.

Show/hide table




Ilustrasi 1	g00934204

Lepaskan pelat penahan atas dan pelat penahan bawah. Periksa strip aus secara visual. Apabila strip aus telah aus hingga mendekati moldboard, ganti strip aus.

Pasang shim antara rel moldboard dan strip aus pada lokasi yang memiliki kerenggangan minimum. Tambahkan shim guna memberi jarak ruang sebesar 0,13 mm (0,005 inci) hingga 0,89 mm (0,035 inci).

Catatan: Shim yang diperlukan harus dibagi secara merata antara strip aus atas dan strip aus bawah.

Pasang pelat penahan atas dan pelat penahan bawah.

Hidupkan engine. Naikkan blade, sehingga blade bebas dari permukaan tanah. Geser blade ke samping sepanjang batas penggerakan keseluruhan. Ukur jarak antara strip aus dan blade. Hal ini akan memungkinkan anda menentukan lokasi yang memiliki kerenggangan minimum.

Matikan engine.

Lepaskan pelat penahan atas dari bracket strip aus tengah. Periksa strip aus secara visual. Apabila strip aus telah aus hingga mendekati moldboard, ganti strip aus.

Pasang shim antara rel moldboard dan strip aus pada lokasi yang memiliki kerenggangan minimum. Tambahkan shim guna memberi jarak ruang sebesar 0,13 mm (0,005 inci) hingga 0,89 mm (0,035 inci).

Pasang pelat penahan atas bracket strip aus tengah.

Caterpillar Information System:

2001/07/09 Improved Grapple Tongs Are Used on Forwarders {6307}

826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Hydraulic System Oil Level - Check

Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Piston Pump (Auxiliary) - Install

416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Drive and Steering Axle (Rear) - Remove

12H, 140H, 143H, 160H and 163H Motor Graders Power Train Differential

Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Piston Pump (Auxiliary) - Remove

824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Fuel Tank Water and Sediment - Drain

Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Piston Motor (Drag Conveyor) - Install

143H and 163H Motor Graders Kingpin Bearings - Lubricate

2001/04/16 A New Track Adjuster Valve is Available {5051}

826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Hydraulic System Oil Filter - Replace

322C Excavator Machine System Specifications Stick Cylinder Lines

Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Hydraulic Cylinder (Tow Point) - Remove and Install

826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System MID 081 - CID 0070 - FMI 04

416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Drive and Steering Axle (Rear) - Install

12H, 140H, 143H, 160H and 163H Motor Graders Power Train Final Drive

735 Articulated Truck Radiator Core - Clean

735 Articulated Truck Oscillating Hitch - Lubricate

2001/04/02 Correct Belt Tension is Necessary in Maintaining Service Life of V-Belt {1357, 1405, 7450}

2001/02/26 A New Shift Solenoid Increases Reliability {3174}

143H and 163H Motor Graders Wheel Lean Bar Bearings - Lubricate

2001/06/01 Guidelines For Maintenance Of Spark Plugs In Gas Engines {1555}

TH103 Telehandler Hydraulic System Telescoping Cylinder

143H and 163H Motor Graders Wheel Lean Bearings - Lubricate