Capacities (Refill)
Show/hide table
| Harvester Head Refill Capacities | |
| Lubrication Oil Tank | 20 L (21 qt) |
| Makeup Fluid for Hydraulic Tank | 8 L (8.5 qt) |
| Reduction Gear (Feed Rollers) | 1.4 L (1.5 qt) |
The lubricating oil is used for the saw chain.
Caterpillar Information System:
HP750 Processing Head Reference Material
561M Pipelayer Boom Winch Motor - Assemble
561M Pipelayer Boom Winch Motor - Disassemble
725 and 730 Articulated Trucks Braking System Pump Flow - Test
735 Articulated Truck Hood Control
725, 730 and 730 EJECTOR Articulated Trucks Power Train Center Axle - Install
725, 730 and 730 EJECTOR Articulated Trucks Power Train Center Axle - Remove
725, 730 and 730 EJECTOR Articulated Trucks Power Train Rear Axle - Install
725, 730 and 730 EJECTOR Articulated Trucks Power Train Rear Axle - Remove
735 Articulated Truck Backup Alarm
CP-663E, CS-663E and CS-683E Vibratory Compactors Belts - Inspect/Adjust/Replace
432D and 442D Backhoe Loaders All Wheel Steer Control - If Equipped
561M Pipelayer Boom Winch - Disassemble
561M Pipelayer Boom Winch - Assemble
735 Articulated Truck Battery Disconnect Switch
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Hydraulic Tank - Disassemble
725 and 730 Articulated Trucks Braking System Solenoid Valve (Parking Brake) - Test
3054B Engine for Caterpillar Built Machines Inlet Manifold
424D, 428D and 438D Backhoe Loaders Backhoe Stabilizer Controls
725, 730 and 730 EJECTOR Articulated Trucks Power Train Differential and Bevel Gear (Front and Rear) - Disassemble
420D, 430D, 432D and 442D Backhoe Loaders Auxiliary Hydraulic Electronic Control System Switch (Quick Coupler Pin)
725, 730 and 730 EJECTOR Articulated Trucks Power Train Differential and Bevel Gear (Front and Rear) - Assemble
735 Articulated Truck Engine Starting with Auxiliary Start Receptacle
TH103 Telehandler Transmission Torque Converter - Assemble