Control Valve (Boom)(Mechanically Operated)
Show/hide table
 | |
| Illustration 1 | g00745693 |
190-3397 Control Valve (Boom) | |
(1) Torque for the bolts ... 8.2 ± 1.0 N·m (73.00 ± 9.00 lb in)
(2) Torque for the makeup and relief valve ... 68.0 ± 7.0 N·m (50.00 ± 5.00 lb ft)
(3) Torque for the relief valve ... 68.0 ± 7.0 N·m (50.00 ± 5.00 lb ft)
(4) Torque for the bolts ... 5.4 ± 1.0 N·m (48.00 ± 9.00 lb in)
(5) Torque for the plug ... 68.0 ± 7.0 N·m (50.00 ± 5.00 lb ft)
(6) Torque for the spacer ... 8.2 ± 1.0 N·m (73.00 ± 9.00 lb in)
(7) Torque for the shuttle seat assembly ... 13.6 ± 1.5 N·m (120.00 ± 13.00 lb in)
(8) Torque for the housing ... 13.6 ± 1.5 N·m (120.00 ± 13.00 lb in)
Caterpillar Information System:
416D Backhoe Loader Hydraulic and Steering System Control Valve (Swing)
IT62G Series II Integrated Toolcarrier Engine Starting with Air Inlet Heater
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Backhoe Bucket)(Mechanically Operated)
247, 257, 267, 277 and 287 Multi Terrain Loaders and 216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Auxiliary Hydraulic Electronic Control System MID 106 - CID 0168 - FMI 03
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Stick)(Mechanically Operated)
797 Off-Highway Truck Hydraulic System Hydraulic Tank
416D Backhoe Loader Hydraulic and Steering System Bank Valve (Backhoe)
2000/09/25 An Improved Tilt Cylinder Guard is Now Available {5104}
3114, 3116, and 3126 Industrial and Generator Set Engines Turbocharger - Inspect/Clean
416D Backhoe Loader Hydraulic and Steering System Hydraulic Hand Control (Backhoe)
2000/11/13 Correction to Disassembly and Assembly , "Wheel Brake Assembly" {4251}
TH103 Telehandler Steering System Wheel Alignment - Check and Adjust
247, 257, 267, 277 and 287 Multi Terrain Loaders and 216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Auxiliary Hydraulic Electronic Control System MID 106 - CID 0168 - FMI 04
2000/09/25 Correction to Electrical System Schematic SENR5897 {7566}
Machine Security System Engine Does Not Crank and Status Indicator Is Green
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Stabilizer - Install
AP-1050B and BG-245C Asphalt Pavers Parking Brake Control
IT62G Series II Integrated Toolcarrier Engine Starting with Jump Start Cables
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Differential and Bevel Gear - Disassemble
2000/10/09 Correction to the Adjustment Procedure of the Swing Dampener for the Grapple {5569}
Machine Security System Engine Does Not Start and Status Indicator Is Continuously Red
AP-1050B and BG-245C Asphalt Pavers Service Brake Control
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Engine Starting with Auxiliary Start Receptacle
AP-1050B and BG-245C Asphalt Pavers Propel Control