Brakes, Indicators and Gauges - Test
Before you operate the machine, perform the following checks and make any necessary repairs.
- Look for broken lenses on the gauges, broken indicator lights, broken switches, and other broken components in the cab.
- Start the engine.
- Look for inoperative gauges.
- Turn on all machine lights. Check for proper operation.
- Sound the horn.
- Move the machine forward slowly and test the service brakes. If the service brakes malfunction, consult your Caterpillar Dealer for repairs.
- Move the machine forward slowly. Move the parking and secondary brake control to the ENGAGED position in order to test the secondary brake. If the secondary brake fails to bring the machine to a stop, consult your Caterpillar Dealer for repairs.
- Stop the engine.
Note: Refer to Operation and Maintenance Manual, "Braking System - Test".
Caterpillar Information System:
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Pump Drive - Remove
D350E Series II and D400E Series II Articulated Trucks Backup Alarm - Test
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Refrigerant Condenser - Remove and Install
IT28G Integrated Toolcarrier and 928G Wheel Loader Steering System Pressure Switch (Primary Steering Oil and Secondary Steering Oil)
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Oil Cooler (Brake) - Install
797 Off-Highway Truck Fan Drive Hydraulic System Suction Fan
TH62, TH63, TH82 and TH83 Telehandlers Transmission Neutralizer Pressure Switch - Adjust
2000/06/19 Precleaner Assemblies Are Now Serviceable {1051, 1055}
2000/05/29 The Required Torque has been Increased for the Piston Retaining Nut in the Tilt Cylinder {5104}
2000/05/29 The Required Torque has been Increased for the Piston Retaining Nut in the Lift Cylinder {5102}
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Service Brakes - Remove and Install
2000/06/19 Correction to Service Magazine, 9EP3441, 31 October 1999 , "New Thrust Washer Improves Service Life of Differential Group" {3258}
TH62, TH63, TH82, TH83 and TH103 Telehandlers Engine Supplement Transmission Oil Cooler - Remove
3408E and 3412E Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
CS-531D, CP-533D and CS-533D Vibratory Compactors Vibratory System Vibratory Frequency - Test and Adjust
2000/06/19 Special Instructions, REHS0611-01 (SI1128-01), "Installation of Axle Cooling" is Available {1365}
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Pump Drive - Install
CS-531D, CP-533D and CS-533D Vibratory Compactors Propel System Piston Pump Servo Neutral - Test and Adjust
CS-531D, CP-533D and CS-533D Vibratory Compactors Vibratory System Hydraulic Control Neutral (Piston Pump) - Test and Adjust
CB-534C and CB-634C Vibratory Compactors Steering System Steering Hydraulic System
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Pump Drive - Disassemble
797 Off-Highway Truck Fan Drive Hydraulic System Speed Sensor (Fan Drive)
CS-531D, CP-533D and CS-533D Vibratory Compactors Propel System Relief Valve (Pressure Override) - Test and Adjust
CS-531D, CP-533D and CS-533D Vibratory Compactors Vibratory System Relief Valve (Charge) - Test and Adjust