Correction to Operation and Maintenance Manual, SEBU6652 and to Operation and Maintenance Manual, SEBU7356 for the Transmission Oil {7560, 7581}
- Backhoe Loader:
- 446B PS (PIN: 5BL2500-UP)
Transmission Oil
Fill the 185-1541 Transmission Arrangement or the 185-1540 Transmission Arrangement with SAE 30 TO-4 oil. Use SAE 30 TO-4 oil for all ambient temperature ranges.
Show/hide table
NOTICE |
---|
This oil is formulated for transmissions and drive trains only, and should not be used in engines. Shortened engine life will result. |
Show/hide table
LUBRICANT VISCOSITIES FOR AMBIENT TEMPERATURES     | ||||||
Compartment or System     | Oil Type and Classification     | Oil Viscosities     | °C     | °F     | ||
Min | Max     | Min     | Max     | |||
Engine Crankcase     | Caterpillar Multigrade DEO API CG-4 API CF-4     |
SAE 0W20     | -40     | 10     | -40     | 50     |
SAE 0W30 | -40     | 30     | -40     | 86     | ||
SAE 5W 30 | -30     | 30     | -22     | 86     | ||
SAE 5W40 | -30     | 40     | -22     | 104     | ||
SAE 10W30 | -20     | 40     | -4     | 104     | ||
SAE 15W40 | -15     | 50     | 5     | 122     | ||
Power Shift Transmission and Torque Converter (2)     | Caterpillar TDTO Caterpillar TO-4     |
SAE 0W20     | -40     | 10     | -40     | 50     |
SAE 0W30 | -40     | 20     | -40     | 68     | ||
SAE 5W30 | -30     | 20     | -22     | 68     | ||
SAE 10W | -20     | 10     | -4     | 50     | ||
SAE 30 | 0     | 35     | 32     | 95     | ||
SAE 50 | 10     | 50     | 50     | 122     | ||
Hydraulic Systems     | Caterpillar HYDO Caterpillar DEO     |
SAE 0W20     | -40     | 40     | -40     | 104     |
SAE 0W30 | -40     | 40     | -40     | 104     | ||
SAE 5W30 | -30     | 40     | -22     | 104     | ||
SAE 5W40 | -30     | 40     | -22     | 104     | ||
SAE 10W | -20     | 40     | -4     | 104     | ||
SAE 30 | 10     | 50     | 50     | 122     | ||
SAE 10W30 | -20     | 40     | -4     | 104     | ||
SAE 15W40 | -15     | 50     | 5     | 122     | ||
BIO HYDO (HEES) (1) | -25     | 43     | -13     | 110     | ||
Front Powered Axles (AWD)     | Caterpillar GO     | SAE 75W90     | -30     | 40     | -22     | 104     |
SAE 80W90 | -20     | 40     | -4     | 104     | ||
SAE 85W140 | -10     | 50     | 14     | 122     | ||
SAE 90 | 0     | 40     | 32     | 104     | ||
Rear Axle     | Caterpillar MTO     |     | -25     | 40     | -13     | 104     |
Show/hide table
( 2 ) | Use only SAE 30 if the machine has a 185-1541 Transmission Arrangement or the 185-1540 Transmission Arrangement . |
( 1 ) | The continuous tank temperature should not exceed 100°C (212°F). The intermediate tank temperatures should not exceed 110°C (230°F). Do not use BIO oil in hydraulic systems with clutches or brakes. |
Lubricant Viscosities and Refill Capacities
Show/hide table
APPROXIMATE REFILL CAPACITIES     | |||
Compartment or System     | Liters     | US Gallons     | Imperial Gallons     |
Cooling System     | 30     | 8     | 6.5     |
Hydraulic Tank     | 57     | 15     | 12.5     |
Fuel Tank     | 125     | 33     | 27.5     |
Engine Crankcase     | 11     | 3     | 2.5     |
Transmission with AWD (1)     | 19     | 5     | 4.2     |
Transmission with AWD (2)     | 12     | 3.2     | 2.6     |
Transmission with 2 Wheel Drive (1)     | 20     | 5.3     | 4.4     |
Transmission with 2 Wheel Drive (2)     | 12.5     | 3.3     | 2.7     |
Powershift Transmission Arrangement with AWD (1)     | 19     | 5     | 4.2     |
Powershift Transmission Arrangement with AWD (2)     | 16     | 4.2     | 3.5     |
Powershift Transmission Arrangement with 2 Wheel Drive (1)     | 20     | 5.3     | 4.4     |
Powershift Transmission Arrangement with 2 Wheel Drive (2)     | 17     | 4.5     | 3.7     |
Real Axle     | 30     | 8     | 6.5     |
Front Powered Axle Center Axle     |
9     | 2.5     | 2     |
Front Powered Axle Final Drive Oil (Each Side)     |
0.8     | 0.2     | 0.17     |
Show/hide table
( 1 ) | The system fill |
( 2 ) | Refill capacity |
Caterpillar Information System:
3126B Engine for Lexion 450, Lexion 460, and Lexion 460 R Combines No Diagnostic Codes Detected
3408E and 3412E Engines for Caterpillar Built Machines CID 0264 FMI 08 Decel Throttle Position signal abnormal
3408E and 3412E Engines for Caterpillar Built Machines CID 0091 FMI 02 Incorrect Throttle Switch inputs
143H and 163H Motor Graders Seat - Inspect
3408E and 3412E Engines for Caterpillar Built Machines CID 0091 FMI 00 Throttle Switch not released
2000/05/15 A Special Instruction for the Installation of the 187-6171 Open ROPS Heater Gp is now Available {7304}
2000/05/22 A New Plate for the Fuse Panel Deflects Rain and Water {7323, 7451}
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Counterweight - Remove and Install
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Suspension System
3176C and 3196 Engines For Caterpillar Built Machines Fuel Filter Base - Install
3176C and 3196 Engines For Caterpillar Built Machines Fuel Filter Base - Remove
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Extender - Adjust
C15 and C18 Engines for Caterpillar Built Machines CID 0266 FMI 02 Incorrect Crank-without-inject inputs
2000/06/19 5T-5925 Guide Assembly No Longer Used {7258}
3126B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
2001/05/14 New Keypads Are Used {7490}
228 and 248 Skid Steer Loaders Machine Systems Pump Flow - Test
3114, 3116, and 3126 Engines Governor - Adjust
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks Low Power/Poor or No Response to Throttle
3408E and 3412E Engines for Caterpillar Built Machines CID 0277 FMI 08 Timing Calibration signal abnormal
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Traction Control Valve - Remove
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0799 FMI 12 Need Service Tool update
24H Motor Grader Hydraulic and Steering System Disc Pack Preload for Circle Drive - Adjust
24H Motor Grader Hydraulic and Steering System Axle Toe-In (Front) - Adjust