Air/Hydraulic Cylinder (Rear Brake) - Remove
开始:
- 安装车斗固定销。 请参阅拆解和组装, "销（车斗固定）- 拆卸和安装"。
- 排出气罐中的空气。 请参阅拆解和组装, "气罐（制动器）- 排气"。
Show/hide table
 |
|
气/液压油缸的空气管路必须在大气压下。 在进行保养前，完全释放空气系统中的气压。 |
Show/hide table
|
|
热油和热的部件可能会导致人员受伤。 请勿让热的液压油或热的零部件与皮肤接触。 |
Show/hide table
| 注意 |
|---|
|
在检查、保养、测试、调整及维修产品时，请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前，请准备好盛接液体用的适当容器。 |
注: 将盖和塞安装在全部孔口上，以免污垢或碎屑进入系统。 清洁度是一项重要的因素。 拆卸步骤开始之前，应彻底清洁部件外部。 这将防止脏污进入内部机构。
- 将导线线束 (2) 从空气/液压油缸 (1) 的电气接头上断开。
Show/hide table
图 2 g00698883 - 将适当的容器放在空气/液压油缸 (1) 下方来盛装机油，以便于存放或弃置。 从空气/液压油缸 (1) 上断开软管组件 (3)。
Show/hide table
图 3 g00698885 - 从空气/液压油缸 (1) 上断开软管组件 (4)。
Show/hide table
图 4 g00698886 - 从空气/液压油缸 (1) 上断开软管组件 (5)。
Show/hide table
图 5 g00698888 - 拆下三个螺栓 (6) 和垫圈。 需要两人将空气/液压油箱 (1) 从机器上拆下。
Show/hide table
| |
| 图 1 | g00698882 |
Caterpillar Information System:
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System Using Caterpillar Monitoring System to Determine Diagnostic Codes
Procedure for Salvaging Off-Highway Truck Wheel Bolt Holes or Stud Holes{4201} Procedure for Salvaging Off-Highway Truck Wheel Bolt Holes or Stud Holes{4201}
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System General Information
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Air/Hydraulic Cylinder (Front Caliper) - Install
988G Wheel Loader Electrohydraulic System Connector Locations
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Ejector Control Valve
228 and 248 Skid Steer Loaders Machine Systems Hydrostatic System - Test and Adjust
777D HAA Off-Highway Truck Retarding
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Tilt Cylinder
2000/04/17 Pull the Injector Sleeve with a 139-0692 Sleeve Jaw {0706, 1713}
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Relief Valve (Steering Cylinder Crossover) - Test and Adjust
24H Motor Grader Cooling System Coolant (ELC) - Change
D400E Series II Articulated Truck Steering, Suspension, and Ejector Body Hydraulic Systems Relief Valve (Ejector)
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System Diagnostic Code List
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System Hydraulic System Troubleshooting
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Air/Hydraulic Cylinder (Rear Brake) - Install
CS-531D, CP-533D and CS-533D Vibratory Compactors Lubricant Viscosities
2000/11/20 New Software Files for the "IQAN" Control System are Available on SIS {5705}
24H Motor Grader Cooling System Pressure Cap - Clean/Replace
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Towing the Machine
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Final Drive Planetary Oil - Change
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Final Drive Planetary Oil Level - Check
D400E Series II Ejector Truck Transmission Control