CS-531D, CP-533D and CS-533D Vibratory Compactors Caterpillar


Lubricant Viscosities

Usage:

CS-531D 4MZ

Table 1
Lubricant Viscosities for Ambient Temperatures    
Compartment or System     Oil Type and Classification     Oil Viscosities     °C     °F    
Min Max     Min     Max    
Engine Crankcase     Caterpillar Multigrade DEO
API CG-4
API CF-4    
SAE 0W20     -40     10     -40     50    
SAE 0W30 -40     30     -40     86    
SAE 5W30 -30     30     -22     86    
SAE 5W40 -30     40     -22     104    
SAE 10W30 -20     40     -4     104    
SAE 15W40 -15     50     5     122    
Hydraulic Systems

Drum Cooling Oil    
Caterpillar HYDO
Caterpillar DEO
Caterpillar TDTO
Caterpillar MTO
API CG-4
API CF-4
API CF
Caterpillar TO-4    
SAE 0W20     -40     40     -40     104    
SAE 0W30 -40     40     -40     104    
SAE 5W30 -30     40     -22     104    
SAE 5W40 -30     40     -22     104    
SAE 10W -20     40     -4     104    
SAE 30 10     50     50     122    
SAE 10W30 -20     40     -4     104    
SAE 15W40 -15     50     5     122    
Caterpillar MTO -25     50     5     104    
BIO HYDO HEES (1) -25     43     -13     110    
Axle     Caterpillar MTO     Caterpillar MTO     -25     40     -13     104    
Final Drive Planetary (Axle)     Caterpillar MTO     Caterpillar MTO     -25     40     -13     104    
Vibratory Support
   
Caterpillar GO     SAE 80W140     -25     40     -13     104    
SAE 80W290 -20     20     -4     68    
SAE 85W140 -5     50     23     122    

Drum Support
   
Caterpillar GO     SAE 80W140     -25     40     -13     104    
SAE 80W290 -20     20     -4     68    
SAE 85W140 -5     50     23     122    
Final Drive Planetary (Drum)     Synthetic ISO 220
Caterpillar TDTO    
ISO 220     -20     50     -4     122    
SAE 50 -11     50     20     122    
Eccentric Weight Housing     Synthetic ISO 220     4C-6767 Synthetic Oil (2)     -20     50     -4     122    
( 1 ) For BIO HYDO HEES oil, the tank temperatures should not exceed 100°C (212°F). Do not use oil in hydraulic systems with clutches or with brakes.
( 2 ) 4C-6767 Synthetic Oil is a premium synthetic gear and a bearing lubricant with no viscosity improvers. This lubricant has an ISO Viscosity Grade of 220, and a minimum viscosity index of 150. Soil Compactors without oil pockets require synthetic gear and bearing lubricant. Asphalt Compactors require synthetic gear and bearing lubricant.

Caterpillar Information System:

776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Air/Hydraulic Cylinder (Rear Brake) - Install
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System Hydraulic System Troubleshooting
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System Diagnostic Code List
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
D400E Series II Articulated Truck Steering, Suspension, and Ejector Body Hydraulic Systems Relief Valve (Ejector)
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Air/Hydraulic Cylinder (Rear Brake) - Remove
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System Using Caterpillar Monitoring System to Determine Diagnostic Codes
Procedure for Salvaging Off-Highway Truck Wheel Bolt Holes or Stud Holes{4201} Procedure for Salvaging Off-Highway Truck Wheel Bolt Holes or Stud Holes{4201}
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System General Information
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Air/Hydraulic Cylinder (Front Caliper) - Install
988G Wheel Loader Electrohydraulic System Connector Locations
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Ejector Control Valve
2000/11/20 New Software Files for the "IQAN" Control System are Available on SIS {5705}
24H Motor Grader Cooling System Pressure Cap - Clean/Replace
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Towing the Machine
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Final Drive Planetary Oil - Change
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Final Drive Planetary Oil Level - Check
D400E Series II Ejector Truck Transmission Control
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Front Suspension (Cylinder) - Remove
777D HAA Off-Highway Truck Backup Alarm
777D HAA Off-Highway Truck Seat
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Compensator Valve - Remove
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Maintenance Interval Schedule
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Compensator Valve - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.