Machine Operation Information
To prevent injury, make sure that no people are on the machine or near the machine. To prevent injury, keep the machine under control at all times.
Reduce engine speed when you maneuver the machine in confined spaces or when you are going over a hill.
Select the appropriate travel speed before you start driving the machine downhill. Do not shift the transmission direction and speed control while you drive the machine downhill.
When you drive the machine downhill, use the same gear speed that would be used to drive the machine uphill.
Do not allow the engine to overspeed when you drive the machine downhill. Use the engine compression brake in order to prevent engine overspeed when you drive the machine downhill. Supplement the engine compression brake with the service brakes when the grade requires additional retardation.
Operating the Machine
- Check for adequate clearance around the machine.
- Press the service brake control in order to prevent the machine from moving.
- Move the parking and secondary brake control to the DISENGAGED position.
Show/hide table
 | |
| Illustration 1 | g00626235 |
- Disengage the transmission neutral lock and move the transmission control in order to select the desired speed and direction.
Show/hide table
 | |
| Illustration 2 | g00626237 |
- Release the service brake control.
- Press the accelerator control so that the machine moves smoothly.
Caterpillar Information System:
D400E Series II Ejector Truck Loading
D400E Series II Ejector Truck Starting Above 0°C (32°F)
D400E Series II Ejector Truck Cold Weather Operation
D400E Series II Ejector Truck After Starting Engine
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Propel System Front Wheel Drive Manifold
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Propel System General Information
2000/03/27 Maintenance and Repair to a Closed Loop System for the Engine Crankcase Breather {1107, 1317}
2000/03/20 A New Indicator Assembly (Voltmeter) {7450}
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Gear Pump (Pulled Unit)
3618 Engine Main Bearings
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Gear Pump (Hoist)
2000/05/01 A Guard for the Transmission Breather Can Be Installed {7153}
D400E Series II Ejector Truck Towing the Machine
D400E Series II Ejector Truck Machine Parking
D400E Series II Ejector Truck Engine Starting
D400E Series II Ejector Truck General Hazard Information
D400E Series II Ejector Truck Shipping the Machine
D400E Series II Ejector Truck Tailgate
D400E Series II Ejector Truck Lifting and Tying Down the Machine
797 Off-Highway Truck Power Train Differential and Bevel Gear - Assemble
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Relief Valve (Brake Oil Cooler)
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Relief Valve (Brake Oil Cooler)
D400E Series II Ejector Truck Sampling Interval and Location of Sampling Valve
D400E Series II Ejector Truck Jacking/Blocking Locations