Machine Parking
Park the machine on a level surface. If you must park the machine on a grade, chock the machine's wheels.
Apply the service brakes in order to stop the machine. Move the transmission control to the NEUTRAL position. Move the accelerator control to the LOW IDLE position. Move the parking and secondary brake control to the ENGAGED position.
The ejector blade must be fully retracted.
Run the engine at low idle for five minutes.
Stop the engine.
Turn the engine start switch to the OFF position and remove the engine start switch key.
Turn the battery disconnect switch to the OFF position. Remove the battery disconnect switch key if you do not operate the machine for an extended period of time. This will prevent drainage of the battery. A battery short circuit, any current draw from certain components, and vandalism can cause drainage of the battery.
Caterpillar Information System:
D400E Series II Ejector Truck Towing the Machine
D400E Series II Ejector Truck Machine Operation Information
D400E Series II Ejector Truck Loading
D400E Series II Ejector Truck Starting Above 0°C (32°F)
D400E Series II Ejector Truck Cold Weather Operation
D400E Series II Ejector Truck After Starting Engine
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Propel System Front Wheel Drive Manifold
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Propel System General Information
2000/03/27 Maintenance and Repair to a Closed Loop System for the Engine Crankcase Breather {1107, 1317}
2000/03/20 A New Indicator Assembly (Voltmeter) {7450}
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Gear Pump (Pulled Unit)
3618 Engine Main Bearings
D400E Series II Ejector Truck Engine Starting
D400E Series II Ejector Truck General Hazard Information
D400E Series II Ejector Truck Shipping the Machine
D400E Series II Ejector Truck Tailgate
D400E Series II Ejector Truck Lifting and Tying Down the Machine
797 Off-Highway Truck Power Train Differential and Bevel Gear - Assemble
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Relief Valve (Brake Oil Cooler)
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Relief Valve (Brake Oil Cooler)
D400E Series II Ejector Truck Sampling Interval and Location of Sampling Valve
D400E Series II Ejector Truck Jacking/Blocking Locations
3034 Engine for Caterpillar Built Machines Fuel Injection Lines
D400E Series II Ejector Truck Refill Capacities