- Skid Steer Loader:
- 216 (S/N: 4NZ1-UP)
- Multi Terrain Loader:
- 267 (S/N: CMP1-UP)
- 226 (S/N: 5FZ1-UP)
- 236 (S/N: 4YZ1-UP)
- 246 (S/N: 5SZ1-UP)
- 252 (S/N: FDG1-UP)
- 262 (S/N: CED1-UP)
- 277 (S/N: CNC1-UP)
The special instruction, REHS0795, "Installation of Wiring and Control for the Operation of Work Tools" is available. The special instruction has been revised in order to provide the instructions for field installation of work tool wiring kits for Skid Steer Loaders and for Multi Terrain Loaders. The work tool wiring kits provide the electrical connection that is needed in order to operate work tools that have solenoids for controlling hydraulic flow within the work tools.
This special instruction includes the procedure for installing the 187-1258 Work Tool Wiring Gp on the 216, 226, 236, 246, 267, and 277 Skid Steer Loaders. This special instruction also includes the procedure for installing the 197-8467 Work Tool Wiring Gp on 252 and 262 Multi Terrain Loaders. These kits can be obtained by a Miscellaneous Shipping Order (MSO) from BCP Sanford.
The special instruction is available through the normal literature distribution system. The publication can also be found on the Caterpillar Service Information System (SIS).