572R Pipelayer Power Train Caterpillar


Transmission Oil Filter - Assemble

Usage:

572R 2HZ

Assembly Procedure




    Illustration 1g00665198

  1. Install two O-ring seals (12), stud (11), element (10), O-ring seal (9), the retainer, and nut (8) on the cover assembly.

  1. Tighten nut (8) to a torque of 15 ± 5.4 N·m (11.06 ± 3.98 lb ft).



    Illustration 2g00665197

  1. Install three bolts (6) that hold cover assembly (7) to the housing assembly.



    Illustration 3g00665195

  1. Install plug (5) in the housing assembly.



    Illustration 4g00665194

  1. Install spring (4), plunger (3), O-ring seal (2), and switch (1) in the housing assembly.

End By: Install the transmission oil filter. Refer to Disassembly and Assembly, "Transmission Oil Filter - Install" for the correct procedure.

Caterpillar Information System:

2005/10/31 Additional Components for the Topcon Grade and Slope Control Are Now Available {5645, 7219, 7220}
572R Pipelayer Power Train Transmission Oil Filter - Disassemble
228 and 248 Skid Steer Loaders Machine Systems Piston Motor (Hydrostatic)
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Fan Drive Speed - Test and Adjust
228 and 248 Skid Steer Loaders Machine Systems Piston Pump (Hydrostatic)
2000/03/06 A New Retainer Ring in The Piston Motor Prevents The Clips from Becoming Dislodged During Operation {5058}
TH62, TH63, TH82 and TH83 Telehandlers Braking System Brake Cylinder (Boost)
2000/01/10 New Maintenance Interval Schedule and Procedure for Checking the Oil Level in the Midwheel Hub {4180, 7526}
2000/01/10 The VIMSpc99 Version 1.1.5 Software Update Is Now Available {7601}
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0100 FMI 04 Engine Oil Pressure short to ground
572R Pipelayer Power Train Power Train Oil Screen - Remove and Install
2012/01/31 Corrections to Cross Reference Prefix Listing for CLAAS Challengers {7000, 7950}
228 and 248 Skid Steer Loaders Machine Systems Tandem Drive
228 and 248 Skid Steer Loaders Machine Systems Axle
2000/10/23 A New Voltage Converter Is Used On Wheel Harvesters and Forwarders {7451}
CB-535B Vibratory Compactor Fuel System - Prime
2000/01/17 Corrections to Certain Publications for a Torque Turn Procedure are Available {4201, 4208}
1999/12/20 Correction to Operation and Maintenance Manual {7560}
CB-535B Vibratory Compactor Steering System Steering Control
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561} Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
CB-535B Vibratory Compactor Steering System Metering Pump (Steering)
228 and 248 Skid Steer Loaders Machine Systems Pilot Valve (Joystick)
2000/01/24 Change in Performance Rating of the 4T-3131 Filter Element {3004}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.