Crankshaft - Remove
Removal Procedure
Start By:
- Remove the engine oil relief valve. Refer to Disassembly and Assembly, "Engine Oil Relief Valve - Remove and Install".
- Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove and Install".
- Remove the housing for the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear Seal - Remove".
- Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
- Remove the pistons and the connecting rods. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (3) from the crankcase cross member.
Show/hide table
Illustration 1 | g00830444 |
Typical example |
- Remove two allen head screws (2) that are recessed. The screws are located at the rear of the engine.
- Place the engine in an upward position. Attach a suitable lifting device (1) to the crankshaft and main bearing assembly (5) .
- Lift crankshaft (5) and the main bearing assembly from cylinder block (6). Do not scratch any of the finished surfaces on the crankshaft.
Caterpillar Information System:
1999/12/06 The VIMSpc99 Software May Experience A Problem When Generating Reports {7601}
CB-214D, CB-224D and CB-225D Vibratory Compactors Vibratory System Eccentric Weight
CB-214D, CB-224D and CB-225D Vibratory Compactors Vibratory System Vibratory Frequency - Test and Adjust
CB-214D, CB-224D and CB-225D Vibratory Compactors Vibratory System Vibratory System Troubleshooting
CB-214D, CB-224D and CB-225D Vibratory Compactors Vibratory System Visual Inspection
CB-214D, CB-224D and CB-225D Vibratory Compactors Vibratory System Machine Preparation for Troubleshooting
793C Off-Highway Truck Window Washer Bottle - Fill
CB-214D, CB-224D and CB-225D Vibratory Compactors Vibratory System Gear Motor (Vibratory)
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
784C and 785C Off-Highway Truck/Tractors Engine Air Filter Service Indicator Screen - Clean/Replace
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Camshaft - Install
216, 226 and 228 Skid Steer Loaders Machine Systems Quick Coupler
D350E Series II Articulated Truck Metering Pump (Steering) - Disassemble
D250E Series II and D300E Series II Articulated Trucks Caterpillar Reference Material
D350E Series II Articulated Truck Piston Pump (Brake) - Disassemble
2000/01/10 Improved Software Includes New Features {7490}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Misfires, Runs Rough or Is Unstable
D350E Series II Articulated Truck Metering Pump (Steering) - Assemble
D350E Series II Articulated Truck Piston Pump (Brake) - Assemble
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Injector Solenoids
3408E and 3412E Engines for Caterpillar Built Machines Intermittent Low Power or Power Cutout
216, 226 and 228 Skid Steer Loaders Machine Systems Gas Spring (Cab)
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Intermittent Engine Shutdown
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove