Quick Coupler
Note: Clean all bores. Bores must be free of rust. Bores must be free of paint. A maximum thickness of 0.025 mm (0.001 inch) primer paint is permitted.
Note: The internal threads and the external threads must be free of primer paint. The internal threads and the external threads must be free of finish paint.
Show/hide table
Illustration 1 | g00677482 |
(1) The length of the 152-1164 Spring after assembly 84 mm (3.31 inch)
- Free length after test ... 114.0 mm (4.49 inch)
- Force of the spring ... 30.7 N·m (22.6 lb ft)
- Direction of the coils ... Right hand
- Outside diameter ... 30.0 mm (1.18 inch)
- Force of the spring ... 30.7 N·m (22.6 lb ft)
(2) Before assembly, apply 4C-9507 Retaining Compound to the threads.
- Size of the bolt ... M16 X 2
(3) Diameter of the four holes ... 32.2 mm (1.27 inch)
(4) Diameter of the four holes ... 32.2 mm (1.27 inch)
(5) Before assembly, apply 5P-0960 Molybdenum Grease to the 142-8776 Pins.
(6) Length for the 159-5797 Spring after assembly 28 mm (1.1 inch)
- Free length after test ... 36.2 mm (1.43 inch)
- Force of the spring ... 275.0 N·m (202.8 lb ft)
- Direction of the coils ... Right hand
- Outside diameter ... 31.75 mm (1.25 inch)
- Force of the spring ... 275.0 N·m (202.8 lb ft)
(7) Assemble the 110-2456 Spring Pin inside the outer surface of the pin clevis.
- Diameter ... 12.0 mm (0.47 inch)
- Length of the 110-2456 Spring Pins ... 40.0 mm (1.58 inch)
Caterpillar Information System:
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Camshaft - Remove
CB-214D, CB-224D and CB-225D Vibratory Compactors Vibratory System Eccentric Weight Housing
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System General Information
784C and 785C Off-Highway Truck/Tractors Window Washer Bottle - Fill
3408E and 3412E Engines for Caterpillar Built Machines Low Power/Poor or No Response to Throttle
572R Pipelayer Machine Systems Combination Valve (Boom) - Assemble
572R Pipelayer Machine Systems Combination Valve (Boom) - Disassemble
2000/01/17 New Engine Software Reduces "High Boost" Events {1901, 1917, 7620}
3114, 3116 and 3126 MUI Engine Governors Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
2000/01/17 A New Cup Holder is Available {7300}
2000/04/03 Correction for Specifications of the Backhoe Linkage {5109, 5112, 6506}
924G and 924GZ Wheel Loaders Power Train Drive Shaft - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Camshaft - Install
784C and 785C Off-Highway Truck/Tractors Engine Air Filter Service Indicator Screen - Clean/Replace
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
CB-214D, CB-224D and CB-225D Vibratory Compactors Vibratory System Gear Motor (Vibratory)
793C Off-Highway Truck Window Washer Bottle - Fill
CB-214D, CB-224D and CB-225D Vibratory Compactors Vibratory System Machine Preparation for Troubleshooting
CB-214D, CB-224D and CB-225D Vibratory Compactors Vibratory System Visual Inspection
CB-214D, CB-224D and CB-225D Vibratory Compactors Vibratory System Vibratory System Troubleshooting
CB-214D, CB-224D and CB-225D Vibratory Compactors Vibratory System Vibratory Frequency - Test and Adjust
CB-214D, CB-224D and CB-225D Vibratory Compactors Vibratory System Eccentric Weight
1999/12/06 The VIMSpc99 Software May Experience A Problem When Generating Reports {7601}
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Crankshaft - Remove