Fuel System - Prime
Show/hide table
 | |
| Illustration 1 | g00537580 |
- Unlock the priming pump plunger.
- Operate the fuel priming pump plunger in order to fill the new filter element with fuel. Continue to pump until a resistance is felt. This resistance will indicate that the filter element is full of fuel.
- Push in the priming pump plunger and tighten the priming pump plunger by hand.
- Start the engine. If the engine will not start, further priming is necessary. If the engine starts but the engine continues to misfire, further priming is necessary. If the engine starts but the engine continues to emit smoke, further priming is necessary.
- If the engine starts but the engine runs rough, continue to run the engine at low idle. Continue to run the engine at low idle until the engine runs smoothly.
Caterpillar Information System:
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations Glossary of Electrical Terms
826G Landfill Compactor, 825G Soil Compactor and 824G Wheel Dozer Power Train Compactor Wheel - Install
CB-534C and CB-634C Vibratory Compactors Steering System Steering System Pressures - Test and Adjust
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations Electronic Control Module (ECM) - Replace
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Main Hydraulic System
3306C Engines for Caterpillar Built Machines Accessory Drive Gears (Rear)
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations Service Tools
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations Electrical Connector - Inspect
3516B Engine Supplement for 793C Off-Highway Truck Engine and Torque Converter - Remove
988G Wheel Loader Braking System Brake Accumulator
3516B Engine Supplement for 793C Off-Highway Truck Engine Oil Filter and Oil Filter Base - Remove and Install
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations General Information
826G Landfill Compactor, 825G Soil Compactor and 824G Wheel Dozer Power Train Cleaner Bar - Remove
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System Numeric Readout Mode
784C and 785C Off-Highway Trucks Machine Systems Regulator (Electric Window) - Remove and Install
988G Wheel Loader Braking System Brake Control Valve (Service)
AP-1000B and BG-260C Asphalt Pavers Fuel Inlet Screen - Clean/Inspect/Replace
Caterpillar Monitoring System Service Mode
AP-1000B and BG-260C Asphalt Pavers Fuel System Primary Filter - Clean/Inspect/Replace
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System Units Mode
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System Permanent Load Count Mode
988G Wheel Loader Braking System Brake Control Valve (Parking)
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System Resettable Load Count Mode
3304B and 3306B Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install