Compactor Wheel - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 4C-5809     | Hydraulic Pump     | 1     |
9U-7536 | Lift Stand     | 1     | |
9U-7531 | Tube Assembly     | 1     |
- Thoroughly clean the contacting surfaces of the wheel and the axle housing.
- Fasten a hoist and suitable lifting chains to wheel (2) . Use the hoist to carefully install wheel (2) to the machine. The approximate weight of the wheel is between 1800 kg (4000 lb) and 2117 kg (4700 lb).
Show/hide table
Illustration 1 | g00537516 |
- Install 30 nuts (1) on the wheel. Tighten the nuts to a torque of 570 ± 80 N·m (420 ± 60 lb ft).
Show/hide table
Illustration 2 | g00537508 |
- Remove the locking pin from Tooling (A) (not shown). Lower the machine to the ground.
- Remove Tooling (A) .
- Remove the wood blocks from the other wheels.
End By:
- Install the bulldozer. Refer to Disassembly and Assembly, "Bulldozer - Install" for the machine that is being serviced.
- Install the cleaner bar. Refer to Disassembly and Assembly, "Cleaner Bar - Install" for the machine that is being serviced.
Caterpillar Information System:
CB-534C and CB-634C Vibratory Compactors Steering System Steering System Pressures - Test and Adjust
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations Electronic Control Module (ECM) - Replace
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Main Hydraulic System
3306C Engines for Caterpillar Built Machines Accessory Drive Gears (Rear)
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations Service Tools
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations Electrical Connector - Inspect
3516B Engine Supplement for 793C Off-Highway Truck Engine and Torque Converter - Remove
988G Wheel Loader Braking System Brake Accumulator
3516B Engine Supplement for 793C Off-Highway Truck Engine Oil Filter and Oil Filter Base - Remove and Install
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations General Information
3516B Engine Supplement for 793C Off-Highway Truck Engine Oil Filter Bypass Valve - Remove and Install
AP-1055B and BG-2455C Asphalt Pavers Final Drive Planetary Oil Level - Check
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations Glossary of Electrical Terms
AP-1055B and BG-2455C Asphalt Pavers Fuel System - Prime
826G Landfill Compactor, 825G Soil Compactor and 824G Wheel Dozer Power Train Cleaner Bar - Remove
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System Numeric Readout Mode
784C and 785C Off-Highway Trucks Machine Systems Regulator (Electric Window) - Remove and Install
988G Wheel Loader Braking System Brake Control Valve (Service)
AP-1000B and BG-260C Asphalt Pavers Fuel Inlet Screen - Clean/Inspect/Replace
Caterpillar Monitoring System Service Mode
AP-1000B and BG-260C Asphalt Pavers Fuel System Primary Filter - Clean/Inspect/Replace
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System Units Mode
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System Permanent Load Count Mode
988G Wheel Loader Braking System Brake Control Valve (Parking)