Time Delay Relay Control (Auto Burner)
Show/hide table
 | |
| Illustration 1 | g00516048 |
The time delay is located in a junction box on the left side of the machine. The junction box is located under an access cover on the top, left side of the machine. Lift the access cover. Open the door on the junction box in order to access the time delay relay.
Use the time delay relay to cool the burners after stopping the machine by allowing the blowers to continue to blow air. Use the relay to set the amount of delay that is needed.
The control is set at the factory to 15 minutes time delay. The operator should reset the amount of time delay according to the operator's preference and the job conditions.
Caterpillar Information System:
793C Off-Highway Truck/Tractor Power Train Final Drive - Disassemble
3524B Engines for Off-Highway Trucks Low Power/Poor or No Response to Throttle
554 Forwarder and 574 Forwarder Hand Controls
D250E Series II and D300E Series II Articulated Trucks Machine Systems Service Brake - Disassemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System General Information
3406E On-Highway Engine Engine Oil Pan - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Secondary Steering System - If Equipped
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System General Information
3406E On-Highway Engine Gear Group (Front) - Remove
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks In-Line Refrigerant Dryer - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Inlet Manifold - Install
3176C and 3196 Engines For Caterpillar Built Machines Inlet Manifold - Remove
583R Pipelayer Power Train Track Rollers
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Undercarriage
793C Off-Highway Truck/Tractor Power Train Torque Converter - Install
3176C and 3196 Engines for Caterpillar Built Machines Camshaft Bearings - Remove and Install
3406E On-Highway Engine Inlet and Exhaust Valve Seals - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Belt and Drive
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Belt Tensioner
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Track - Tension/Detension
527 Track-Type Skidder Power Train Priority Valve
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Pan - Remove and Install
980G Wheel Loader Power Train Carrier Bearing (Drive Shaft) - Remove and Install
3406C Engines for Caterpillar Built Machines Flywheel Housing