793C Off-Highway Truck/Tractor Power Train Caterpillar

Disassembly Procedure

Start By:

1. Remove the flow control and relief valve (rear axle oil). Refer to Disassembly and Assembly, "Flow Control and Relief Valve (Rear Axle Oil) - Remove".

Show/hide table

Illustration 1	g00511848

1. Place the flow control and relief valve (rear axle oil) on a suitable bench.

2. Remove adapter (1) and O-ring seal (2).

   Note: The bolts that retain adapter (1) were removed during the removal procedure of the flow control and relief valve.

   Show/hide table

   Illustration 2	g00511850

3. Remove valve (3).

4. Remove two O-ring seals (4).
   Show/hide table

   Illustration 3	g00511852

5. Use Tool (A) to remove retaining ring (5).
   Show/hide table

   Illustration 4	g00511855

6. Separate spool (7) and spring (6) from body (8).
   Show/hide table

   Illustration 5	g00511858

7. Remove valve (10) and washer (11) from body (9).