Flow Control and Relief Valve (Rear Axle Oil) - Install
Note: Inspect the O-ring seals. Replace any O-ring seals that are worn or damaged.
Note: During the installation of the O-ring seals, lubricate the O-ring seals with the fluid that is being sealed.
- Install two O-ring seals (15) and O-ring seals (14).
Show/hide table
Illustration 2 g00511727 Show/hide tableIllustration 3 g00511729 - Install flow control and relief valve (5), four washers, and four bolts (11).
- Install oil pressure sensor (13). Connect oil pressure sensor (13) of the differential.
- Install O-ring seal (10). Connect hose assembly (7). Install split flange (9) and four bolts (8).
- Disconnect hose assembly (1). Remove O-ring seal (2), elbow (3), and O-ring seal (4).
- Repeat Step 5 for hose assemblies (6) and (12).
Show/hide table
Illustration 1 | g00511733 |
End By:
- Remove the truck body retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".
Caterpillar Information System:
793C Off-Highway Truck/Tractor Power Train Flow Control and Relief Valve (Rear Axle Oil) - Remove
769D Off-Highway Truck/Tractor and 771D Quarry Truck Power Train Rear Wheel
773D Off-Highway Truck and 775D Quarry Truck Rear Wheel
527 Track-Type Skidder Lubricant Viscosities
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Turbocharger - Remove
3176C and 3196 Engines For Caterpillar Built Machines Fuel Priming Pump - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Machine Systems Steering Cylinder - Remove
527 Track-Type Skidder S·O·S Oil Analysis
CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System Spray Nozzle - Adjust
773D Off-Highway Truck and 775D Quarry Truck Rear Axle Housing
769D Off-Highway Truck/Tractor and 771D Quarry Truck Power Train Rear Axle Housing
3176C and 3196 Engines For Caterpillar Built Machines Air Compressor - Remove and Install
Electrical Connectors{1600} Electrical Connectors{1600}
527 Track-Type Skidder Power Train Track Rollers - Single Flange and Double Flange
793C Off-Highway Truck/Tractor Power Train Flow Control and Relief Valve (Rear Axle Oil) - Disassemble
527 Track-Type Skidder Refill Capacities
527 Track-Type Skidder Power Train Tracks
IT14G Integrated Toolcarrier and 914G Wheel Loader Standard Power Train Hydrostatic Drive
3176C and 3196 Engines For Caterpillar Built Machines Fuel Transfer Pump - Remove
3176C and 3196 Engines For Caterpillar Built Machines Fuel Transfer Pump - Install
3406C Engines for Caterpillar Built Machines Belt Tensioner - Belt Tensioner Without Spring Tensioner
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Hydrostatic Drive
IT14G Integrated Toolcarrier and 914G Wheel Loader Standard Power Train Motor Mounting (Hydrostatic)
3176C and 3196 Engines For Caterpillar Built Machines Electronic Unit Injector - Remove