3176C and 3196 Engines For Caterpillar Built Machines Caterpillar


Fuel Priming Pump - Remove and Install

Usage:

140H 126

拆卸步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。



注意

在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。

有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。

按照当地法规和要求处置所有液体。




图 1g01018936

  1. 拆下螺栓 (1) 和垫圈。

  2. 从燃油滤清器座上拆下充油泵 (2) 和密封垫。

安装步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。




图 2g01018936

  1. 检验密封垫的状况。 必要时,更换密封垫。

  2. 确保气门组件位于注油泵的正确位置。

  3. 将密封垫和燃油注油泵 (2) 安装到燃油滤清器座上。

  4. 安装垫圈和螺栓 (1)。

  5. 检查充油泵的工作情况。

Caterpillar Information System:

D250E Series II and D300E Series II Articulated Trucks Machine Systems Steering Cylinder - Remove
527 Track-Type Skidder S·O·S Oil Analysis
CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System Spray Nozzle - Adjust
773D Off-Highway Truck and 775D Quarry Truck Rear Axle Housing
769D Off-Highway Truck/Tractor and 771D Quarry Truck Power Train Rear Axle Housing
3176C and 3196 Engines For Caterpillar Built Machines Air Compressor - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) LPS Calibration
3406E On-Highway Engine Camshaft Bearings - Install
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Hydraulic Filter (Pulled Unit Brake Cooling)
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Engine Oil Cooler Bypass Valve - Remove and Install
773D Off-Highway Truck and 775D Quarry Truck Differential
769D Off-Highway Truck/Tractor and 771D Quarry Truck Power Train Differential
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Turbocharger - Remove
527 Track-Type Skidder Lubricant Viscosities
773D Off-Highway Truck and 775D Quarry Truck Rear Wheel
769D Off-Highway Truck/Tractor and 771D Quarry Truck Power Train Rear Wheel
793C Off-Highway Truck/Tractor Power Train Flow Control and Relief Valve (Rear Axle Oil) - Remove
793C Off-Highway Truck/Tractor Power Train Flow Control and Relief Valve (Rear Axle Oil) - Install
Electrical Connectors{1600} Electrical Connectors{1600}
527 Track-Type Skidder Power Train Track Rollers - Single Flange and Double Flange
793C Off-Highway Truck/Tractor Power Train Flow Control and Relief Valve (Rear Axle Oil) - Disassemble
527 Track-Type Skidder Refill Capacities
527 Track-Type Skidder Power Train Tracks
IT14G Integrated Toolcarrier and 914G Wheel Loader Standard Power Train Hydrostatic Drive
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.