793C Off-Highway Truck/Tractor Power Train Caterpillar

Assembly Procedure

Show/hide table

Illustration 1	g00511858

1. Place the flow control and relief valve (rear axle oil) on a suitable bench.

2. Install washer (11) and valve (10) on body (9).
   Show/hide table

   Illustration 2	g00511855

3. Install spool (7) and spring (6) in body (8).
   Show/hide table

   Illustration 3	g00511852

4. Use Tool (A) to install retaining ring (5).
   Show/hide table

   Illustration 4	g00511850

5. Install valve (3).

6. Install two O-ring seals (4).
   Show/hide table

   Illustration 5	g00511848

7. Install O-ring seal (2) and adapter (1).

End By:

1. Install the flow control and relief valve (rear axle oil). Refer to Disassembly and Assembly, "Flow Control and Relief Valve (Rear Axle Oil) - Install".