LPS Menu Functions Summary
The following table is a summary of the VIMS/LPS supported functions. The keypad command is listed in the first column. The second column is a brief description.
Show/hide table
Command | Description |
"F1/Menu" "0" | Enter a new truck ID. |
"F1/MENU" "1" "0" | Enter a new material. |
"F1/MENU" "1" "1" | Enter a new load site. |
"F1/MENU" "1" "2" | Enter a new blast number. |
"F1/MENU " "1" "3" | Enter a new target truck weight. |
"F1/MENU" "1" "4" | Enter a new truck counter value. |
"F1/MENU" "1" "5" | Enter a new operator. |
"F1/MENU" "1" " 6" | This command allows the operator to toggle the payload horn ON and OFF via the keypad. |
"F1/MENU" "2" | “Reweighs the current bucket load. ” |
"F1/MENU" "3" | “Selects the display mode of the message center. ” |
"F1/MENU " "4" | View/print productivity report information |
"F1/MENU" "5" "0" | “Executes a list viewer in order to check the calibration information.(Date,Time and etc.)” |
"F1/MENU " "5" "1" | “Executes a mode to check the weigh range.” |
"F1/MENU " "5" "2" | “Executes a mode to set the weigh range.” |
"F1/MENU" "5" "3" | Enter a carryback weight. |
"F1/MENU " "5" "4" | Enter a calibration weight. |
"F1/MENU" "5" "5" | “Executes a calibration mode for a new or revised calibration.” |
"F1/MENU" "5" "6" | Enter the bucket volume. |
"F1/MENU" "6" | “Executes a sub-menu used to turn Loader Payload ON or OFF.” |
"STORE" | “Permanently stores truck/cycle/delay information for download, later.” |
"F3/DELAY" | “Allows the selection of a new loader delay code.” |
"F2/CLEAR" | “Clears the last non stored bucket load from memory.” |
"GAUGE" | “Sets the virtual gauge to view a VIMS parameters.” |
"ID" | Enter an operator ID. |
Caterpillar Information System:
D250E Series II and D300E Series II Articulated Trucks Power Train Universal Joint (Center) - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Loader Payload System (LPS) General Information
Installation Guide for Operator Platform and Operator Access Ladder{7253, 7254} Installation Guide for Operator Platform and Operator Access Ladder{7253, 7254}
784C and 785C Off-Highway Trucks Machine Systems Hoist Cylinder - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Oscillating Axle
793C Off-Highway Truck/Tractor Power Train Transmission Planetary - Assemble
793C Off-Highway Truck/Tractor Power Train Transmission Planetary - Disassemble
793C Off-Highway Truck/Tractor Power Train Transmission and Transfer Gears - Remove
793C Off-Highway Truck/Tractor Power Train Transfer Gears - Assemble
793C Off-Highway Truck/Tractor Power Train Transfer Gears - Disassemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Fixed Axle
3406C Engines for Caterpillar Built Machines Fan Drive
769D Off-Highway Truck/Tractor and 771D Quarry Truck Power Train Differential
773D Off-Highway Truck and 775D Quarry Truck Differential
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Engine Oil Cooler Bypass Valve - Remove and Install
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Hydraulic Filter (Pulled Unit Brake Cooling)
3406E On-Highway Engine Camshaft Bearings - Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) LPS Calibration
3176C and 3196 Engines For Caterpillar Built Machines Air Compressor - Remove and Install
769D Off-Highway Truck/Tractor and 771D Quarry Truck Power Train Rear Axle Housing
773D Off-Highway Truck and 775D Quarry Truck Rear Axle Housing
CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System Spray Nozzle - Adjust
527 Track-Type Skidder S·O·S Oil Analysis
D250E Series II and D300E Series II Articulated Trucks Machine Systems Steering Cylinder - Remove