Illustration 1 | g02078853 |
(1) 4M-2381 Spring
- Test length ... 12.2 mm (.48 inch)
- Test force ... 2.30 ± 0.18 N (.517 ± .041 lb)
- Free length after test ... 22.6 mm (.889 inch)
- Outside diameter ... 7.62 mm (.300 inch)
- Test force ... 2.30 ± 0.18 N (.517 ± .041 lb)
(2) 7G-4842 Spring (Outer with two red stripes)
First test
- Test length ... 62.5 mm (2.46 inch)
- Test force ... 32.3 ± 1.6 N (7.26 ± .36 lb)
Second test
- Test length ... 36.3 mm (1.43 inch)
- Test force ... 142.3 ± 4.3 N (31.98 ± .97 lb)
- Free length after test ... 68.45 (2.695 inch)
- Outside diameter ... 27.79 mm (1.094 inch)
- Test force ... 142.3 ± 4.3 N (31.98 ± .97 lb)
(3) 9P-3041 Spring (Inter with two red stripes)
First test
- Test length ... 110.0 mm (4.33 inch)
- Test force ... 72.6 ± 3.6 N (16.32 ± .81 lb)
Second test
- Test length ... 85.5 mm (3.37 inch)
- Test force ... 240.3 ± 7.2 N (54.0 ± 1.6 lb)
- Free length after test ... 117.40 mm (4.622 inch)
- Outside diameter ... 21.21 mm (.835 inch)
- Test force ... 240.3 ± 7.2 N (54.0 ± 1.6 lb)
(4) 5M-9622 Spacer
- Thickness of one spacer ... 1.60 mm (.063 inch)
- Outside diameter ... 20.62 ± 0.25 mm (.812 ± .010 inch)
- One spacer will change pressure approximately. ... 98 kPa (14.2 psi)
- Outside diameter ... 20.62 ± 0.25 mm (.812 ± .010 inch)
(4) 5M-9623 Spacer
- Thickness of one spacer ... 90 mm (.035 inch)
- Outside diameter ... 20.62 ± 0.25 mm (.812 ± .010 inch)
- One spacer will change pressure approximately. ... 57 kPa (8.2 psi)
- Outside diameter ... 20.62 ± 0.25 mm (.812 ± .010 inch)
(4) 5M-9624 Spacer
- Thickness of one spacer ... 0.25 mm (.010 inch)
- Outside diameter ... 20.62 ± 0.25 mm (.812 ± .010 inch)
- One spacer will change pressure approximately. ... 16 kPa (2.3 psi)
- Outside diameter ... 20.62 ± 0.25 mm (.812 ± .010 inch)
(5) Torque for three bolts ... 30 ± 7 N·m (22 ± 5 lb ft)
(6) 6P-9784 Spring (Outer with a yellow stripe)
- Test length ... 56.39 mm (2.220 inch)
- Test force ... 130 ± 7 N (29.3 ± 1.5 lb)
- Free length after test ... 88.60 mm (3.488 inch)
- Outside diameter ... 16.26 mm (.640 inch)
- Test force ... 130 ± 7 N (29.3 ± 1.5 lb)
(7) 6P-9783 Spring (Inner with a yellow stripe)
- Test length ... 56.39 mm (2.220 inch)
- Test force ... 62 ± 3 N (13.9 ± .7 lb)
- Free length after test ... 88.60 mm (3.488 inch)
- Outside diameter ... 11.02 mm (.434 inch)
- Test force ... 62 ± 3 N (13.9 ± .7 lb)
(8) 6P-9785 Spring (With a yellow stripe)
- Test length ... 19.48 mm (.767 inch)
- Test force ... 23.5 ± 1.2 N (5.28 ± .27 lb)
- Free length after test ... 32.00 mm (1.260 inch)
- Outside diameter ... 12.19 mm (0.479 inch)
- Test force ... 23.5 ± 1.2 N (5.28 ± .27 lb)
Illustration 2 | g00508956 |
(9) 7S-4607 Detent Assembly (There are four detent assemblies.)
(A) Maximum free length ... 30.86 mm (1.215 inch)
(B) An applied force of 32 ± 3 N (7.2 ± .7 lb) should hold the ball at the following position. ... 29.97 mm (1.180 inch)
(C) An applied force of 45 ± 4 N (10.1 ± 1.0 lb) should hold the ball at the following position. ... 27.69 mm (1.090 inch)