583R Pipelayer Power Train Caterpillar

Torque Divider

Usage:

583R 2XS

Show/hide table




Illustration 1	g00507740

Torque Divider

(1) Diameter of the unworn planetary shaft ... 26.439 ± 0.005 mm (1.0409 ± 0.0002 inch) (2) Inside diameter of the unworn planetary gear ... 34.399 ± 0.010 mm (1.3543 ± 0.0004 inch) (3) Torque for the bolts that hold the retainer to the housing ... 50 ± 7 N·m (37 ± 5 lb ft) (4) Torque for the nut ... 170 ± 15 N·m (125.3852 ± 11.0634 lb ft) (5) Torque for the bolts that hold the stator to the carrier ... 30 ± 5 N·m (22 ± 4 lb ft) (6) Torque for the bolts that hold the impeller to the housing ... 30 ± 5 N·m (22 ± 4 lb ft) (7) Torque for the bolts that hold the carrier to the impeller ... 50 ± 7 N·m (37 ± 5 lb ft) (8) Torque for the bolt that holds the yoke to the shaft ... 115 ± 7 N·m (85 ± 5 lb ft) (9) Torque for the bolts that hold the torque divider to the housing ... 50 ± 7 N·m (37 ± 5 lb ft) (10) Outside diameter of the new shaft in the bearing area ... 44.437 ± 0.013 mm (1.7495 ± 0.0005 inch)

Inside diameter of the new bearings after installation ... 44.501 ± 0.013 mm (1.7520 ± 0.0005 inch)

(11) Apply 9S-3263 Thread Lock Compound to the threads on bolts (11) . Advance the hole to the next available spline space and torque the bolts in place.

Show/hide table

Table 1
Components		Clearance Across the Diameter	Clearance During Operation
(A) Stator and Turbine	new	0.23 to 0.38 mm (0.009 to 0.015 inch)	0.115 to 0.190 mm (0.0045 to 0.0075 inch)
(A) Stator and Turbine	max wear	0.61 mm (0.024 inch)	0.30 mm (0.012 inch)
(B) Stator and Impeller	new	0.30 to 0.46 mm (0.012 to 0.018 inch)	0.15 to 0.23 mm (0.006 to 0.009 inch)
(B) Stator and Impeller	max wear	0.76 mm (0.030 inch)	0.38 mm (0.015 inch)