Steering Cylinder - Disassemble
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 1U-9900 | 液压油缸修复台 | 1 |
开始:
- 拆下转向油缸。 请参阅拆解和组装, "转向油缸 - 拆卸"。
Show/hide table
| 注意 |
|---|
|
在检查、保养、测试、调整及维修产品时，请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前，请准备好盛接液体用的适当容器。 |
- 将适当的容器置于转向油缸下面。 将转向油缸中的任何剩余液压油排入适当的容器，以便弃置或储存。
- 将转向油缸置于工具 (A) 中（图中未显示）。 转向油缸的重量约为
52 kg (115 lB) 。 - 从油缸组件 (1) 上拆下盖 (2)。
- 从油缸组件 (1) 上滑动连杆组件 (3) 和盖 (2)。
- 将承磨环 (13) 和 U 形杯密封 (12) 从活塞 (14) 上拆下。
- 拆卸将活塞 (14) 固定至连杆组件 (3) 的螺栓 (10) 和垫圈 (11)。 从连杆组件 (3) 上拆下活塞 (14)。
- 滑动油缸组件 (1) 的连杆组件 (3) 和盖 (2)。 将盖 (2) 手动拧紧在油缸组件 (1) 上。 将油缸组件 (1) 和盖 (2) 拉出连杆组件 (3)。 从油缸组件 (1) 上拆下盖 (2)。
- 将连杆雨刷器 (6)、U 形杯密封 (7)、密封组件 (8) 和承磨环 (9) 从盖 (2) 上拆下。
- 从盖 (2) 上拆下 O 形密封圈 (4) 和支承环 (5)。
- 拆下 O 形密封圈螺塞 (15) 和 O 形密封圈。
Show/hide table
| |
| 图 1 | g00505928 |
Caterpillar Information System:
G3B, K3A and L3A Denso Alternators T7 Identifying Source of Current Draw - Test
583R Pipelayer Power Train Transmission - Remove
3406C Engines for Caterpillar Built Machines Valve Mechanism Cover
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0801 FMI 09 Interface Module (No. 1) Abnormal Update - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0650 FMI 02 Harness Code Incorrect - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0324 FMI 06 Lamp (Action) Current Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0324 FMI 05 Lamp (Action) Current Below Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0324 FMI 03 Lamp (Action) Voltage Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0271 FMI 06 Alarm (Action) Current Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0271 FMI 05 Alarm (Action) Current Below Normal - Test
980G Wheel Loader Power Train Output Transfer Gears from Transmission, Torque Converter - Separate
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Slack Adjuster (Rear) - Install
D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Counterbalance Valve (Tailgate) - Test and Adjust
3406C Engines for Caterpillar Built Machines Valve Rocker Arms, Lifters, and Bridges
3176C and 3196 Engines for Caterpillar Built Machines Flywheel Housing
3408E and 3412E Engines for Caterpillar Built Machines Water Pump
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Fuel Tank - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Fuel Tank - Install
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Steering Cylinder - Assemble
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Towing
G3B, K3A and L3A Denso Alternators T8 Alternator Overcharging - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Water Pump - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Speed/Timing Sensor
583R Pipelayer Power Train Transmission - Install